Phoenix Contact Retaining Relay Clip for use with PR1 Series

  • RS-artikelnummer 508-0281
  • Tillv. art.nr 2833547
  • Tillverkare / varumärke Phoenix Contact
Datablad
Lagstiftning och ursprungsland
Uppfyller ej
COO (Country of Origin): IT
Produktdetaljer

Phoenix Contact Non-Latching Relays, REL-MR Series

Phoenix contacts REL-MR series of non-latching relays are commonly found within industrial environments, they are considered to be electrical and mechanical devices. This type of relay can often be referred to an electromechanical relay or an industrial switch.

Features & Benefits

• Pluggable miniature relays, with power contact for high continuous current
• Varied switching current dependant on the relay chosen from the REL-MR series
• Pluggable miniature relay - compact in size
• Additional hard gold plating
• AC and DC coil voltages
• Robust and hard wearing

What is a non-latching relay and how do they work?

A relay is an electrical switch that is operated by electrical pulses, their primary function is to open and close a circuit. When power passes through a circuit, a relay switches position (usually from NC to NO) using an internal coil which generates a magnetic force. This force then holds the relay in a NO position, when the current is switched off the relay returns to the NC position. This function is what makes these non-latching relays perfect for push-button applications such as keyboards and micro-controller input buttons.

A little more info

Non-latching relays support a range of signal characteristics, ranging from low voltage or current to high voltage or current and from DC to GHz frequencies.

What is the difference between a latching relay and a non-latching relay?

• When a latching relay operates its contacts, the relay holds its position, even when the supply of its operating coil has been disconnected.
• When a non-latching relay operates its contacts, the relay will reset automatically once the supply of its coil is disconnected through the internal spring mechanism.

Standards

  IEC 60255, EN 50178, EN 60730, IEC 60664

Approvals

  DIN VDE 0435, DIN VDE 0160, DIN VDE 0631, DIN VDE 0110

Relay Retaining Bracket 508-0281, this relay retaining bracket features an eject function and integrated equipment marking area (7.5 x 15 mm), to suit relay socket PR1, for 16 mm high miniature power relay and solid-state relay.

Specifikationer
Attribute Value
Material Plastic
Accessory Type Retaining Bracket
For Use With PR1 Series
Series EL1-P16
22 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
8,05 kr
(exkl. moms)
10,06 kr
(inkl. moms)
Enheter
Per unit
1 - 24
8,05 kr
25 - 99
7,75 kr
100 - 249
7,54 kr
250 - 499
6,51 kr
500 +
6,30 kr
Related Products
XB5R series push buttons transmitters. Mounting Diameter: 22 ...
Description:
XB5R series push buttons transmitters. Mounting Diameter: 22 mmMechanical Life: 1000000 cycles.
Finder 38 series relay interface modules are an ...
Description:
Finder 38 series relay interface modules are an ideal interface for PLC and electronic systems. Din Rail mounting Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit 6.2 mm or 14 mm wide versions available. ...
The Omron 14-pin DIN rail mount socket has ...
Description:
The Omron 14-pin DIN rail mount socket has screw terminal leads. It has a terminal contact current rating of 10A and voltage rating of 240V. The socketed relay is retained and ejected using a simple clip. This relay socket is ...
The Tempatron DIN rail mount socket has screw ...
Description:
The Tempatron DIN rail mount socket has screw terminal leads. It has a voltage rating of 380VAC. The socketed relay is retained and ejected using a simple clip. This relay socket is used for 11pin octal relays and 11pin octal ...