Burkert solenoid coil is predominantly used with solenoid valves within pneumatic applications. Another common application is to start, stop or direct the flow of hydraulic fluid. It has been created and designed to withstand and operate in aggressive conditions and fluctuating temperatures.
This coil is ideal as a replacement solenoid coil
Made up of durable, hardwearing materials
Corrosion resistant construction
Low wear, long life design
G 1/ 4 inlet and exhaust ports
Delivered in 5/2 configuration, can be converted to 3/2 value with a supplied adaptor plate
NAMUR interface change for direct connection to pneumatic linear and quarter turn actuators with a NAMUR interface connection
A Solenoid coil needs to be replaced within a hydraulic system when the solenoid valve either wears down or stops working
Did you know that a solenoid is electromagnetic? It's made up of a tightly wrapped metal coil around a solid metal core
A solenoid coil is most commonly used as a low-power switch that opens and closes a pilot valve, which also controls the main valve through applying pressure to a connected piston
Series 6519 Standard | |
Duty Cycle | 100% |
Flow rate | 1300 l/min @ 6 bar |
Response time | 20ms (on) 40ms (off) |
Pressure range | 2 - 8 bar |
Temperature range | -25 to +55°C |
Port connections | G 1/ 4 and NAMUR flange |
Valve body material | Polyamide (PA) |
Seal material | NBR and PUR |
Electrical Connection | Cable Plug to DIN EN175301-803 |
Voltage | 24Vac and dc - universal |
Power Consumption | 2 W |
Zones Approved | Safe area only |
Protection Class | IP65 with cable plug fitted |
Attribute | Value |
---|---|
Manufacturer Series | 6519 |
Power Supply Voltage | 110V ac |