Change Over Reed Switch, 1A

  • RS-artikelnummer 909-2831
  • Tillv. art.nr GC1625 (90-105AT)
  • Tillverkare / varumärke Assemtech
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): BE
Produktdetaljer

Form A & C Reed Switches

These dry-reed switches have been hermetically sealed in a gas-filled glass envelope. Actuation is done with an electro-magnet, a permanent magnet or a combination of both. If you prefer, they can be placed alongside a coil and actuated when a current is applied to the coil. They feature single pole, single throw, normally open contacts and have two magnetically actuated reeds.

There is a wide selection to choose from. You can select different lengths and each length has various sensitivity options.

Hermetically sealed
Form A (SPNO) or form C (SPCO) ruthenium or rhodium plated contacts
Mechanical Life 108 Operations
For suitable magnets, see stk. no 362-2401 typically

Approvals

UL, CSA

Specifikationer
Attribute Value
Contact Configuration Change Over
Maximum Switching Current 1A
Contact Resistance 100mΩ
Contact Material Rhodium
Maximum Release Time 0.1ms
Operating Time Including Bounce 0.5ms
AT Value Range 60-80AT
Width 5.6 (Dia.)mm
Length 52mm
Dimensions 5.6 (Dia.) x 52mm
30 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each (In a Bag of 10)
53,596 kr
(exkl. moms)
66,995 kr
(inkl. moms)
Enheter
Per unit
Per Bag*
10 +
53,596 kr
535,96 kr
Related Products
For use with reed switches. ...
Description:
For use with reed switches.
These kits have been specially brought together for ...
Description:
These kits have been specially brought together for the design stage. Each kit has a selection of sensitivity levels from the required series allowing you to test which is best for your application. This eliminates the need to purchase packs ...
These dry-reed switches have been hermetically sealed in ...
Description:
These dry-reed switches have been hermetically sealed in a gas-filled glass envelope. Actuation is done with an electro-magnet, a permanent magnet or a combination of both. If you prefer, they can be placed alongside a coil and actuated when a ...
These dry-reed switches have been hermetically sealed in ...
Description:
These dry-reed switches have been hermetically sealed in a gas-filled glass envelope. Actuation is done with an electro-magnet, a permanent magnet or a combination of both. If you prefer, they can be placed alongside a coil and actuated when a ...