Megger RCDT320 RCD Tester 1000mA DC CAT III 300 V

  • RS-artikelnummer 537-7888
  • Tillv. art.nr RCDT320-FR
  • Tillverkare / varumärke Megger
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): GB
Produktdetaljer

RCDT320 differential circuit breaker tester

Differential circuit breaker tester that meets the requirements of NFC 15-100, EN6557-3 and IEC 61010 for testing low-voltage electrical wiring.
0 ° or 180 ° polarity selection.
Selectable touch voltage and display on the analogue arc.
300 Vac voltage measurement range.
3-phase safe (the device will remain safe, even if it is connected across phases).
Mains voltage measurement.
Large digital display with a true analogue response.
The rigid display cover folds out of the way during testing and locks down to protect the display when finished.
Test locking - prevents testing when mains voltage exceeds 300 V.
Supplied with a 3-wire test lead set fitted with crocodile clips, a mains plug test lead, 8 x AA rechargeable alkaline batteries and a hard carry case.
Sealing: IP54.
IEC 61010-1 compliant for safe use at 440 V on installations classified as Cat. III 600 V or Cat. IV 300 V.

Specifikationer
Attribute Value
RCD Test Current 1000mA
RCD Test Type DC
Display Type LCD
Safety Category CAT III 300 V
Battery Type Rechargeable NiCd, Rechargeable NiMH
Battery Life 2000 Tests
Power Source Battery
Dimensions 203 x 148 x 78mm
Weight 980g
Height 78mm
Length 203mm
Maximum Operating Temperature +40°C
Minimum Operating Temperature -5°C
Model Number p RCDT320
Width 148mm
Plug Type Type G - British 3-pin
Safety Category Voltage 300V
I lager för leverans inom 2 arbetsdagar
Pris (ex. moms) Each
7 713,56 kr
(exkl. moms)
9 641,95 kr
(inkl. moms)
Enheter
Per unit
1 +
7 713,56 kr
Nästa dag-leverans inte möjlig
Related Products
MIT480 mk2 Series insulation & continuity testers replace ...
Description:
MIT480 mk2 Series insulation & continuity testers replace the original MIT480 range. Designed for the Telecommunication and Cable testing markets. The tester features a redesigned case, back-stand and 6 cell battery compartment with separate fuse access. Insulation testing up to ...
Digital/analogue display with backlightingSelect the testing voltage for ...
Description:
Digital/analogue display with backlightingSelect the testing voltage for a variety of applicationsAutomatic dischargeSensor head with extra activation buttonDetects live switchesAdjustable threshold alarm (good/poor testing)Auto power off functionSafety: CAT III 600VProtection rating: IP54.
The Megger MIT410/2 200Gohm insulation and continuity testers ...
Description:
The Megger MIT410/2 200Gohm insulation and continuity testers have a redesigned case, back-stand and 6-cell battery compartment with separate fuse access. Insulation testing has been enhanced with feedback controlled test voltages to limit over-voltage to 2%, rather than the industry-standard ...
The Megger insulation and continuity tester has a ...
Description:
The Megger insulation and continuity tester has a redesigned case, back-stand and 6-cell battery compartment with separate fuse access. Insulation testing is enhanced with feedback controlled test voltages to limit over-voltage up to 2%, rather than the industry standards i. ...