FTDI Chip, HUB Interface USB Expansion Board for Raspberry Pi, RPI-HUB-MODULE

  • RS-artikelnummer 767-6190
  • Tillv. art.nr RPI-HUB-MODULE
  • Tillverkare / varumärke FTDI Chip
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): ID
Produktdetaljer

Raspberry Pi HUB Interface Expansion Module, FTDI Chip

The HUB Interface Expansion Module for the Raspberry Pi is ideal if you want to expand the number of downstream port interfaces on your Pi board.

What does the HUB Interface Expansion Module feature?
•Dual Channel USB/UART/245FIFO/SPI/I2C/JTAG/GPIO interface converter
•USB 2.0 hub chip with 3 downstream USB ports. (2 via a dual connector and 1 via the DIL connector pins).
FT2232H bridge chip handles all USB signalling and protocols and has 2 interfaces that can be configured for asynchronous/synchronous serial communication or Parallel FIFO interface
GL850G hub controller with 4 downstream USB ports

Other Key Features & Benefits
•USB type A plug
•External power input connector
•Support for USB suspend and resume
•Defaults to 2 independent UART interfaces
•300 baud to 12 Mbaud UART data transfer rates at 3.3 V TTL levels
•Multi-Protocol Synchronous Serial Engine (MPSSE) data rates of up to 30 Mbps on JTAG, SPI and I2C
•Green/red status LED for downstream USB port 1 & 2
•LED indicating power supply to external downstream ports
•On-board EEPROM 93LC56 for FT2232H configuration
•UHCI/OHCI/EHCI host controller compatible

Specifikationer
Attribute Value
Product Name USB Expansion Add On Board for Raspberry Pi
Accessory Category Interface
Form Factor Addon
35 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
327,36 kr
(exkl. moms)
409,20 kr
(inkl. moms)
Enheter
Per unit
1 - 1
327,36 kr
2 - 9
318,43 kr
10 - 19
310,09 kr
20 - 49
302,16 kr
50 +
294,61 kr
Related Products
The TTL-234X-3V3-2mm cable is terminated by an 8 ...
Description:
The TTL-234X-3V3-2mm cable is terminated by an 8 way, 2mm pitch, Single-In-Line (SIL) keyed connector. The TTL-234X-3V3-2mm operates at +3.3V levels (signals only, VCC=+5V). These cables are primarily intended for interfacing the FTDI VDRIVE2 and VMUSIC2 modules. Note that when ...
The TTL-234X-5V-AJ and TTL-234X-3V3-AJ cables are both terminated ...
Description:
The TTL-234X-5V-AJ and TTL-234X-3V3-AJ cables are both terminated by a standard 3.5mm Audio Jack (AJ) connector. The difference between the two cables is that the TTL-234X-5V-AJ operates at +5V levels and the TTL-234X-3V3-AJ operates at +3.3V levels. On these cables ...
The VNC2 is the second of FTDI’s Vinculum ...
Description:
The VNC2 is the second of FTDI’s Vinculum family of Embedded dual USB host controller devices. The VNC2 device provides USB Host interfacing capability for a variety of different USB device classes including support for BOMS (bulk only mass storage), ...
The FTDI Chip DB9-USB to UART converter module ...
Description:
The FTDI Chip DB9-USB to UART converter module is used to upgrade an RS232 port to an active USB port without the need to redesign the PCB. The family consist of 6 modules, 2 of them operate at RS232 voltage ...