- RS-artikelnummer:
- 178-4905
- Tillv. art.nr:
- HV9123NG-G
- Tillverkare / varumärke:
- Microchip
45 I lager för avsändande samma dag
Lagt till varukorgen
Pris (ex. moms) Var (i ett rör med 45)
27,143 kr
(exkl. moms)
33,929 kr
(inkl. moms)
Enheter | Per unit | Per Tube* |
45 + | 27,143 kr | 1 221,435 kr |
- RS-artikelnummer:
- 178-4905
- Tillv. art.nr:
- HV9123NG-G
- Tillverkare / varumärke:
- Microchip
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
HV912x Series High-Voltage Current-Mode PWM Controllers
The Microchip HV912x range of high-voltage current-mode PWM controllers are Switch Mode Power Supply (SMPS) controller subsystems that can start and run directly from almost any DC input such as 12V batteries and a rectified and filtered 240VAC line.
These devices can self-start directly from a high voltage input and subsequently take the power to operate from one of the outputs of the converter it is controlling, allowing very efficient operation while maintaining input-to-output galvanic isolation limited in voltage only by the insulation system of the associated magnetic assembly. A ±2% internal bandgap reference, internal operational amplifier, very high speed comparator, and output buffer allow production of rugged, high performance, high efficiency power supplies of 50W or more, which can still be over 80% efficient at outputs of 1.0W or less. Remote on/off controls allow either latching or nonlatching remote shutdown. During shutdown, the power required is under 6.0mW.
These devices can self-start directly from a high voltage input and subsequently take the power to operate from one of the outputs of the converter it is controlling, allowing very efficient operation while maintaining input-to-output galvanic isolation limited in voltage only by the insulation system of the associated magnetic assembly. A ±2% internal bandgap reference, internal operational amplifier, very high speed comparator, and output buffer allow production of rugged, high performance, high efficiency power supplies of 50W or more, which can still be over 80% efficient at outputs of 1.0W or less. Remote on/off controls allow either latching or nonlatching remote shutdown. During shutdown, the power required is under 6.0mW.
Features
10 to 450V input voltage range
<1.3 mA supply current
>1.0 MHz clock
>20:1 dynamic range @ 500 kHz
Low internal noise
<1.3 mA supply current
>1.0 MHz clock
>20:1 dynamic range @ 500 kHz
Low internal noise
Typical Applications
Off-line high frequency power supplies
Universal input power supplies
High density power supplies
Very high efficiency power supplies
Extra wide load range power supplies
Universal input power supplies
High density power supplies
Very high efficiency power supplies
Extra wide load range power supplies
PWM (Pulse Width Modulation) Controllers, Microchip
Specifikationer
Attribute | Value |
---|---|
Maximum Switching Frequency | 3 MHz |
Output Voltage | 4.16 V |
Output Current | 10 mA |
Control Method | Current, Voltage |
Number of Outputs | 1 |
Fall Time | 75ns |
Mounting Type | Surface Mount |
Rise Time | 75ns |
Package Type | SOIC |
Pin Count | 16 |
Maximum Duty Cycle | 99% |
Dimensions | 10 x 4 x 1.65mm |
PWM Controller Type | Current Mode |
Length | 10mm |
Width | 4mm |
Height | 1.65mm |
Minimum Operating Temperature | -55 °C |
Maximum Operating Temperature | +125 °C |
Maximum Operating Supply Voltage | 13.5 V |
Minimum Operating Supply Voltage | 9 V |