Tektronix THDP0100 Oscilloscope Probe, Probe Type: Differential, High Voltage 100MHz 6kV

  • RS-artikelnummer 752-7353
  • Tillv. art.nr THDP0100
  • Tillverkare / varumärke Tektronix
Datablad
Lagstiftning och ursprungsland
Und.t.
COO (Country of Origin): CN
Produktdetaljer

Tektronix Oscilloscope Probes

The Tektronix differential high voltage oscilloscope has the largest differential dynamic range capability. It allows the user to safely measure up to ±6000V. The probe supports bandwidths up to 100MHz and slew rates up to 2500V/ns at 1/1000 gain. This probe is supplied with two sizes of hook tips and has an over-range visual and audible indicator that warns the user when they are exceeding the linear range of the probe.
Note:
TMDP and THDP Series probes have the TekVPI® interface which enables smart communication between oscilloscope and probe - each TekVPI probe features controls and indicators located on the probe compensation box, designed to provide quick and easy access to the probe's most commonly required set-up controls and operating status. P52xxA Series probes have the Tektronix TekProbe® interface which communicates scale information to the oscilloscope.
The THDP0100 is capable of measuring floating voltages up to 6000V safely. An over-range visual and audible indicator warns the user when the linear range of the probe is exceeded.
Supplied with:
2 probe tips
2 large hook clips
2 small hook clips
2 probe heads

Features and Benefits

Bandwidth is DC to 200MHz
Attenuation ratio is 1:100 and 1:1000
Rise time is 3.5ns
Input impedance is 40Mohmll2.5pF
Maximum common mode voltage is ±6000KV
Maximum Input voltage is 2300V CAT I 1000V CAT III
Typical CMRR DC: >-80dB/100 kHz: >-60dB/3.2 MHz: >-30dB/100 MHz: >-26dB
Overrange Indicator
Safety Certified
Switchable attenuation
Switchable bandwidth limit

Applications

Floating measurements
Switching power supply design
Motor drive design
Electronic ballast design
CRT display design
Power converter design and service
Power device evaluation
BNC interface (P5200A probes)
TekVPI interface (TMDP and THDP Series probes)
TekProbe interface

Certifications

CE certified
ISO certified
CAT I 2300 V
CAT III 1000 V

Specifikationer
Attribute Value
Probe Type Differential, High Voltage
Attenuation 1:100, 1:1000
Bandwidth 100MHz
Maximum Common Mode Input Voltage 6kV
Connector Type BNC
Model Number p THDP0100
Safety Category Level CAT I, CAT III
Safety Category Voltage 1000 V, 2300 V
Series THD
Safety Category CAT I 2300 V, CAT III 1000 V
Rise Time 3.5ps
3 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
41 019,72 kr
(exkl. moms)
51 274,65 kr
(inkl. moms)
Enheter
Per unit
1 +
41 019,72 kr
Related Products
Bandwidth DC-70 MHzRise time ≤5 nsDC accuracy ±2%Attenuation ...
Description:
Bandwidth DC-70 MHzRise time ≤5 nsDC accuracy ±2%Attenuation ratio 50 X/500 XMaximum differential test voltage (DC + Peak AC) 50 X: 150 V, 500 X: 1500 VMaximum input common mode voltage (voltage-to-earth Vrms) 600 V CATIII, 1000 V CATIIInput impedance ...
The HVD3000A series of high voltage differential probes ...
Description:
The HVD3000A series of high voltage differential probes cover the fullest range of applications, from 120/240 V switch-mode power supplies through 600 V class and 5 kV electrical apparatus. The table below provides a list of recommended probe models based ...
For high-speed switch mode power supply design; CAN/LIN ...
Description:
For high-speed switch mode power supply design; CAN/LIN bus design; high-speed digital design; digital design and characterization; manufacturing engineering test; research and development. ±42 V (DC + pk AC) differential input voltage 18 dB CMRR (at 250 MHz 50X attenuation) ...
High quality passive voltage probes suitable for use ...
Description:
High quality passive voltage probes suitable for use with Tektronix oscilloscopes or as general purpose replacements. Each probe features compensation trimmers to allow matching to instruments. Supplied complete with accessoriesRated voltage CAT II 300V rms, CAT I 400V rms.