Daniels Manufacturing, M22520/1-01 Plier Crimping Tool for Crimp Contact

Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): US
Produktdetaljer

AF8 Tool

AF8 tool for wire barrel sizes 12-20 (12-26awg)

DMC AF8 Adjustable Crimp Tool

From Daniels Manufacturing, this AF8 Adjustable Crimp Tool is highly adaptable and crimps a broad spectrum of wire sizes. With interchangeable turret heads available, the AF8 Adjustable Crimp Tool can be adapted to suit specific requirements. Lightweight and easy to operate, this handy crimp tool uses a precision ratchet control to assure an accurate crimp with each use.

Features and Benefits:

• Versatile crimping range
• 8 position selector knob
• Precision ratchet control
• Lightweight
• Interchangeable positioner

The AF8 Crimping Tool requires the following accessories:
• The crimp tool requires the locator to crimp 16, 12 and 08 contact sizes, see stock number 343-2826 (typical.)
• Insertion and extraction tools are required for contact sizes 16 and 12, sees stock number 343-2810 (typical.)

Typical Applications:
• Maintenance & repair
• Prototype Production Application
• Lab Work
• Electrical Installations
• Cable assemblies

FAQ’s:
What is the difference between un-insulated and insulated crimp tools?

Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present.

How do you maintain the product?

• Axles and other movable parts should be regularly lubricated.
• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants.
• Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly.

The Importance of a High-Quality Crimp

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

Specifikationer
Attribute Value
Series M22520/1-01
Crimp Connector Type Crimp Contact
Crimp Tool Type Plier
Overall Length 247.65 mm
46 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
5 081,49 kr
(exkl. moms)
6 351,86 kr
(inkl. moms)
Enheter
Per unit
1 +
5 081,49 kr
Related Products
The Knipex is Handy, transparent dispenser crime toolbox. ...
Description:
The Knipex is Handy, transparent dispenser crime toolbox. It is a rotating lid with an opening to remove individual end sleeves. It contains the different size of wire AWG such as 5AWG, 7AWG, 10AWG, 11AWGby DIN colour code.
Lightweight design and very high density, microComp® is ...
Description:
Lightweight design and very high density, microComp® is an alternative to HD DSUB with superior characteristics,A flexible alternative to MIL-STD 83513 connectors. Stainless steelCompatible with MIL-STD 83513 interfaces.
Self-adjusting wire end ferrule tool with front operationAs ...
Description:
Self-adjusting wire end ferrule tool with front operationAs opposed to front entry, single-sided open profile enables a contact from 0.08 → 2.5 mm2 to be input from the side (improved access)Adjusts automatically to different cable cross-sectionsProduces a square crimp profile ...
Bought to you under the trusted RS brand, ...
Description:
Bought to you under the trusted RS brand, this universal punchdown tool for terminating wire to both Krone and 110 IDC blocks. The removable double-ended blades allow for punch down action on one end, and punch down/cut on the other. ...