Adafruit 2866, NeoPixel 40 RGBW Cool White LED Matrix Shield for Arduino

Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

NeoPixel Shield 5 x 8 RGBW LED Matrix

The Adafruit NeoPixel Shield has 40 super bright LEDs in an 5 x 8 matrix. Each NeoPixel is 'split' with one half being RGB and the other is a white LED. This combined LED enables you to choose any colour or illuminate using with white light. Available in 3 colours of white light – warm white (3000K), neutral white (4500K) and warm white (6000K). This LED matrix shield will fit neatly on top of you Arduino board.

If you need more, then you can also daisy chain NeoMatrix together. For the second shield, connect the DIN connection to the first panel DOUT.

There is a single data line with a timing-specific protocol. Since the protocol is sensitive to timing, it requires a real-time microcontroller such as an AVR, Arduino, PIC or mbed.

Adafruit 2864 - NeoMatrix 40 RGBW, Warm White (RS 124-5493)
Adafruit 2865 - NeoMatrix 40 RGBW, Neutral White (RS 124-5494)
Adafruit 2866 - NeoMatrix 40 RGBW, Cool White (RS 124-5495)

Dimensions: 53 x 69 x 3 mm / 2.1" x 2.7" 0.1"
Weight: 27.1 g

Larger 64 RGBW LED versions in an 8 x 8 matrix are also available with the same colour temperature options (RS 124-5496, 124-5497, 124-5498).

Adafruit LEDs, Drivers and Shields

Specifikationer
Attribute Value
LED Technology LED Matrix
Kit Classification Shield
For Use With Arduino
Kit Name NeoPixel 40 RGBW Cool White
Denna produkt har utgått
Related Products
The Adafruit NeoPixel NeoMatrix has 64 super bright ...
Description:
The Adafruit NeoPixel NeoMatrix has 64 super bright LEDs in an 8 x 8 matrix. Each NeoPixel is 'split' with one half being RGB and the other is a white LED. This combined LED enables you to choose any colour ...
With 4 times as many pixels it makes ...
Description:
With 4 times as many pixels it makes much more complex animations possible, including scrolling text, and even low resolution videos.The bundled ninja diffuser makes the pixels look extra-shiny by providing some subtle diffusion, blurring the lines between each pixel. ...
The CCRGEVB is an evaluation board used to ...
Description:
The CCRGEVB is an evaluation board used to demonstrate some very simple, elegant, and cost effective solutions using ON Semiconductor's Constant Current Regulator. The board is divided into four general circuits, and contains 7 CCR's. There is also a LowVce ...
Grove - LED is designed for the beginners ...
Description:
Grove - LED is designed for the beginners of Arduino/Seeeduino to monitor controls from digital ports. It can be mounted to the surface of your box or desk easily and used as pilot lamp for power or signal. Its brightness ...