ADAFRUIT PRO TRINKET 3V MCU Development Board with ATmega328P - 2010

Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

Adafruit Pro Trinket Mini Microcontrollers

Adafruit Pro Trinket 5V development board Measures only 38 mm x 18 mm x 2 mm (1.5" x 0.7" x 0.2") (without headers) Provides easy and simple access to the ATtiny85 MCU for development and programming. Small form factor means it can easily be incorporated into prototype/ design.

The pro trinket features Microchip’s ATtiny85 MCU with 8KB program flash, 20 MIPS CPU, 5 PWMs, 2 8 bit timers. Uses the Atmel ATmega328P microcontroller, 28K of flash, 2K of RAM and 18 GPIO.


The Pro Trinket is programmable using the AVRdude and/or the Arduino IDE, and there is a reset button for entering the bootloader or restarting the program as well as LED indication for bootloading. You can also use an FTDI cable to connect to the FTDI port for a serial connection.

The Adafruit Pro Trinket development kit is the bigger, more powerful sister of the Trinket (RS 124-5509, 124-5506) with roughly 4 times the performance and GPIO.

What's on Board?

- Micro-B USB connector for simple connectivity to a PC
- Power with either USB or external output(such as a battery)- it will automatically switch over
- Headers for an FTDI port for reprogramming
- On-board green power LED and red pin #13 LED GPIO pins (18 pins)
- 16MHz clock rate, 28K FLASH available
- Reset button for entering the bootloader or restarting the program.
- I2C/SPI Interface for simple hardware integration
- 3 or 5V Output an onboard regulator provides 3.3V or 5V output for powering LEDs, sensors, small motors, etc.
- External reset pin
- 3 Mounting holes

Works with 99% of existing Arduino sketches (anything that doesn't use more than 28K, and doesn't require pins #2 and #7)

The Pro Trinket is available in two versions:

Pro Trinket 3.3 V - 12 MHz (RS 124-5511)
Pro Trinket 5 V - 16 MHz (RS 124-5507)

Note

Due to its small size, you cannot stack an Arduino shield directly on top of the Pro Trinket.

Adafruit Trinket Microcontrollers (MCU)

Specifikationer
Attribute Value
Classification Development Board
Kit Name PRO TRINKET 3V
Technology MCU
Processor Part Number ATmega328P
Processor Type MCU
32 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
91,80 kr
(exkl. moms)
114,75 kr
(inkl. moms)
Enheter
Per unit
1 +
91,80 kr
Related Products
The Adafruit Feather M0 WiFi has all the ...
Description:
The Adafruit Feather M0 WiFi has all the basic features shared by the Feather M0 range together with a certified WiFi module. The Atmel ATWINC WiFi model is 802.11bgn-capable, Soft-AP, SSL TSL 1.2 support, built-in low-power management and rock solid ...
The BeagleBone Black Wireless from beagleboard.org is a ...
Description:
The BeagleBone Black Wireless from beagleboard.org is a development board based on the AM335x Arm Cortex-A8 processor, with additional wireless networking functionality. This BeagleBone board is a single board computer (SBC) which is supplied with Debian Linux OS pre-installed and ...
4G LTE-E click carries the LARA-R211 multi-mode cellular ...
Description:
4G LTE-E click carries the LARA-R211 multi-mode cellular module from u-blox. The board is designed to use 5V power supply. I/O voltage levels could be 3.3V or 5V. It communicates with the target microcontroller over UART interface, with additional functionality ...
The Microchip Technology RS-485 extension-board is ideal for ...
Description:
The Microchip Technology RS-485 extension-board is ideal for evaluation and prototyping applications involving RS485/422. It belongs to the Atmel Xplained Pro series of small-sized and easy-to-use evaluation kits for Atmel AVR 8- and 32-bit microcontrollers and SoC RF modules. It ...