RS PRO Process Pump Controller for Brushless Micropump Pump, 12 V

  • RS-artikelnummer 125-3570
  • Tillverkare / varumärke RS PRO
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): GB
Produktdetaljer

Brushless Micro Pump Controller

A compact and highly efficient motor controller for the RS Pro range of centrifugal micro-pumps.
The EQi controller accepts and input voltage of up to 30 volts and pump speed can be controlled from a potentiometer on the board or via a 0-5v external signal. With voltages above 12v the controller works to maintain a constant flow despite the increase in back pressure helping to provide a flatter flow – pressure curve.
Installation is easy, simply wire the two input terminals, attach the three outputs to the micro-pump and set the jumper position for on board speed control or control via an external 0-5v signal.

Applications

The EQi controller's compact dimensions, ease of installation and efficency make it suitable for a broad range of applicatiosn including
• Research and development
• Laboratory equipment
• Prototyping
• Production equipment

Specifikationer
Attribute Value
Compatible Pump Type Brushless Micropump
Supply Voltage 12 → 30 V dc
Connection 2 Screw Terminal (Input), 3 Screw Terminal (Output)
Maximum Fluid Temperature +80°C
Maximum Output Pressure 0.55bar
Tillfälligt slut i lager – restorder för leverans 2020-06-22
Pris (ex. moms) Each
651,06 kr
(exkl. moms)
813,82 kr
(inkl. moms)
Enheter
Per unit
1 +
651,06 kr
Related Products
These variable phase angle regulators are robust, compact ...
Description:
These variable phase angle regulators are robust, compact and enclosed units for 230V or 110V up to 15A single phase mains driven inductive loads, such as induction motors, fans & pumps. They give fully adjustable voltage outputs from zero to ...
The VAC2-3/RFI is a compact variable phase-angle regulator ...
Description:
The VAC2-3/RFI is a compact variable phase-angle regulator of open construction and suitable for 230V single-phase operation with mains driven inductive loads, such as induction motors, fans and pumps. An integral choke/capacitor RFI circuit enables the controller to meet current ...
Accepts input from level probes and float switches ...
Description:
Accepts input from level probes and float switches to provide enhanced switching capabilitySupply voltage 12Vdc (max.)ABS case materialIngress protection to IP65 (subject to cable entry)Operating temperature range -10 to +50°CSwitching capacity: 5A at 240VacDimensions: H64 x W58 x D35mm.
From European Thermodynamics, the Adaptive® JUNIOR PID controlled ...
Description:
From European Thermodynamics, the Adaptive® JUNIOR PID controlled pulse width modulator (PWM).This temperature controller has been designed for heating and cooling of thermoelectric assemblies requiring a reliable bidirectional drive source for accurate temperature control. The Adaptive® JUNIOR features 4 type ...