RS PRO Air Switch Actuator,

  • RS-artikelnummer 317-730
  • Tillverkare / varumärke RS PRO
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): GB
Produktdetaljer

Surface mounting push button

Surface mounting actuator suitable for use with all air switches.
The push button requires a single mounting hole of 42mm dia.
Operating temperature range -10°C → +60°C (subject to tube length limitations - see additional data tables)

Surface Mount Actuator

Actuators, Switch Elements, Tubing & Accessories

The air operated switch system offers enhanced safety in hazardous areas by allowing remote operation of electrical circuits.
The actuator is a bellows which, when compressed moves air down the air tubing to the switch element. This compressed air then expands a bellows in the switch, which operates the electrical contacts.
When used in wet environments or where electrical switching would be dangerous due to arcing, the switch and all electrical wiring can be located outside the hazardous area giving the operator total electrical isolation for the equipment.
Such applications include: Battery charging rooms, laboratories, garages, or wherever explosive gases, vapours or powders may exist.

When assembled the air switch and actuator form a sealed system, therefore temperature variation will cause pressure changes, which can in extreme cases affect the performance of the switch. To prevent this the total volume of the system must be kept below a critical value for a given temperature range and, to this end, a maximum length of air tubing (and hence volume) can be given for any combination of switch and actuator.
The additional data tables give these lengths in metres; for moderate and extreme temperatures.

Specifikationer
Attribute Value
Manufacturer Series 6442
42 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
227,62 kr
(exkl. moms)
284,52 kr
(inkl. moms)
Enheter
Per unit
1 - 4
227,62 kr
5 - 9
220,56 kr
10 +
213,41 kr
Related Products
Air distributors for RS Pro FRL components. ...
Description:
Air distributors for RS Pro FRL components.
Double acting mechanically jointed rodless cylinder with air ...
Description:
Double acting mechanically jointed rodless cylinder with air cushioning and a magnetic piston as standard. The MY1b-Z provides a simple, compact, reliable method for positioning or moving components and finished parts. These rodless actuators are suitable for a diverse range ...
Double acting mechanically jointed rodless cylinder with air ...
Description:
Double acting mechanically jointed rodless cylinder with air cushioning and a magnetic piston as standard. The MY1b-Z provides a simple, compact, reliable method for positioning or moving components and finished parts. These rodless actuators are suitable for a diverse range ...
The MXQ-Z air slide uses one table design ...
Description:
The MXQ-Z air slide uses one table design with a choice four body variations to provide the best possible solution for your guided actuator requirements. This next generation of MXQ slide table is manufactured using a stronger, lighter stainless steel ...