Druck ATEX Gauge for Fluid Pressure Sensor, 250mbar Max Pressure Reading , 9 30 V dc, G1/4, IP65

  • RS-artikelnummer 285-289
  • Tillv. art.nr X610-02G-1300
  • Tillverkare / varumärke Druck
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): GB
Produktdetaljer

Druck Precision Pressure Transmitters

Forming part of Druck’s PTX 600 series, this range of pressure transmitters offer a high level of stability, measurement accuracy and stability. Created and designed for critical applications within industrial and research environments, featuring proven silicon technology that has been developed to provide a miniature micro-machined diaphragm. These gauge style pressure sensors are the perfect solution for continuous monitoring in hazardous environments.

Features & Benefits

• Metal seal assembly provides exceptional thermal and stress isolation
• Two-wire electronics includes power supply regulation and amplifier stages
• Independent zero and span controls, zero offset and span setting ±5% site adjustable by sealed, noninteracting potentiometers
• Reverse polarity and over-voltage protection
• RFI bulkhead provides feedthrough filters within the body tube assembly
• The PTX 600 series has a range of 1.5 (100 mbar) through to 10,000 psi (700 bar)
• Rugged compact design
• Great protection against electrical interference
• The transmitter provides an integral female pressure port - 1/4" NPT female
• Fluids compatible with a fully welded assembly of 316 stainless steel and Hastelloy C276 (NACE compatible grades)
• The overall length is 139mm and a diameter of 38mm
• DIN 43650 electrical connector is supplied
• Comprised of hardwearing, aesthetically pleasing stainless steel
• Suitable for use within Zone "O" Gas Group IIC, Temperature Class T4
• G'BSP connection
• Transmitter Supply Voltage: 9-30VDC
• Output Current: 4-20mA (2 wire configuration)
• Temperature effects: less than 0.5% FS over 15° to +122°F- typically 0.3% FS, 15° to +122°
• Gauge configuration (sealed gauge for pressure above 1000 PSI - Absolute for 11.5 to 17 PSI model)

Did you know?

If a product is intrinsically safe, it means that it is incapable of releasing sufficient electrical and thermal energy under normal or abnormal conditions. This results in the item not being able to cause ignition of a specific hazardous atmospheric mixture in its most easily ignited concentration.

Note

Supplied with instruction leaflet, a copy of certificates are available upon request

Specifikationer
Attribute Value
Pressure Reading Type Gauge
Minimum Pressure Reading 0mbar
Maximum Pressure Reading 250mbar
Accuracy ±0.08 %
Output Type Analogue
Media Measured Fluid
Process Connection G1/4
Electrical Connection DIN 43650 Type A
Analogue Output 4 20 mA
Supply Voltage 9 30 V dc
Housing Material Stainless Steel
IP Rating IP65
Hazardous Area Certification ATEX
Minimum Operating Temperature -10°C
Maximum Operating Temperature +50°C
Tillfälligt slut i lager – restorder för leverans 2020-04-03
Pris (ex. moms) Each
8 980,60 kr
(exkl. moms)
11 225,75 kr
(inkl. moms)
Enheter
Per unit
1 +
8 980,60 kr
Kalibrerade alternativ:
Related Products
Ultra-sensitive, rapid-response pressure sensors to measure differential pressure. ...
Description:
Ultra-sensitive, rapid-response pressure sensors to measure differential pressure. PBN1B332-A: sensor with fixed detection threshold and radial output on Ø 5 mm fluted tube.PBN1B222-R6: pressure sensor with threshold adjustable with a screw (Ø 1.27 mm) included in the housing, with perpendicular ...
Range of pressure converters used to measure relative ...
Description:
Range of pressure converters used to measure relative and absolute pressures in liquid and gas environments.Output 4 → 20 mA.AISI 304 stainless steel housing.Part in contact with measured environment in AISI 316Ti / 316L stainless steel.2-wire output with screw terminal ...
The 3000 Series Pressure Sensor is ideal for ...
Description:
The 3000 Series Pressure Sensor is ideal for OEM’s that require consistent high levels of performance reliability and stability. Offering you stainless steel wetted parts, a variety of electrical and pressure connections, and wide choice of electrical outputs allowing stock ...
Pressure transducers are used to detect relative and ...
Description:
Pressure transducers are used to detect relative and absolute pressures in liquids and gases. Operates according to the piezo-resistive or thin-film DMS measuring principlePressure is converted into an electrical signal.