Selectivity Module for use with SITOP

  • RS-artikelnummer 714-1268
  • Tillv. art.nr 6EP1961-2BA21
  • Tillverkare / varumärke Siemens
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): AT
Produktdetaljer

SITOP PSE200U Selectivity Module

The SITOP PSE200U selectivity module is the optimal addition to all 24 V power supplies for distributing and monitoring the load current across several branch circuits. Overload and short-circuit in one or more feeders are reliably detected.
The electronics tolerate short-term current peaks, e.g. due to high inrush current, and de-energize feeders with longer overload. This is ensured even on high-resistance cables and for short-circuits that develop slowly over time.
The intact feeders continue to be supplied with 24 V without any interruption or disturbance, thereby minimizing plant downtimes. The faulty feeder is signalled using LEDs and a group signal contact. Regardless of the industry or requirements, Siemens offers reliable and efficient power supplies for every plant.

Features and Benefits:

  • Reliable shutdown in case of overload regardless of cable lengths or cable cross-sections

  • 4 load feeders per module with individually adjustable maximum current for each output

  • Two versions for remote diagnostics: Group signaling contact or single-channel signalling

  • Evaluation via free-of-charge SIMATIC S7 function blocks (S7-1500/1200/300/400) for modules with single-channel signaling (PSE200U)

  • LEDs for rapid on-site fault localization

  • Remote reset possible from a central location (PSE200U)

  • Simple commissioning thanks to manual switch on/off of outputs (PSE200U)

  • Sequential connection of feeders to reduce total inrush current

  • Sealable transparent cover over adjusters for currents and times protects against maladjustment (PSE200U)

Advantages of a selectivity module

A power supply unit (PSU) cannot guarantee a fault-free supply when used on its own. The selectivity module offers reliable detection of overload or short-circuit in the circuit. A selectivity module enables reliable shutdown in case of overload regardless of cable lengths or cross-sections.

Approvals

CE, cULus, UR, CB, ATEX, IEXEx, cCSAus Class I Div 2, GL, ABS

Specifikationer
Attribute Value
Accessory Type Selectivity Module
For Use With SITOP
9 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
1 270,00 kr
(exkl. moms)
1 587,50 kr
(inkl. moms)
Enheter
Per unit
1 +
1 270,00 kr
Related Products
The RSPxxx-168 is a surge protector module designed ...
Description:
The RSPxxx-168 is a surge protector module designed to protect DC/DC converters from railway over-voltage transients up to 385VDC. The output voltage tracks the input voltage in the range of 40-165VDC, thereafter the output voltage is clamped to 168VDC. The ...
Buffering with service free electrolytic capacitors24V or 48V ...
Description:
Buffering with service free electrolytic capacitors24V or 48V models availableConstant output voltage in buffer modeBuffer time 0.2s at 20A (24V) or 0.1s at 20A (48V)Longer hold-up time at lower levelsBuffer units can be connected in parallel to increase the output ...
Block's PowerVision is one of the most technically ...
Description:
Block's PowerVision is one of the most technically advanced and cost-effective power supply systems on the market. All modules are slim, feature communication capacities and boast maximum power reserve for optimum system availability. CompactStabilised and adjustable output voltageUp to 200% ...
A extension to the TSP series of DIN ...
Description:
A extension to the TSP series of DIN rail mount power supplies featuring an ultrawide input range which allows the modules to be used in almost all single and 2 phase power networks worldwide.With a Battery Controller Module also available, ...