Keysight Technologies N6705C DC Power Analyzer

Lagstiftning och ursprungsland
COO (Country of Origin): MY

Key sight Technologies DC Power Quality Analyser

The Key sight Technologies DC power analyser provides unrivalled productivity gains for sourcing and measuring DC voltage and current into the DUT (device under test) by integrating up to 4 advanced power supplies with DMM, Scope, Arb, and Data Logger feature. It eliminates the need to gather multiple pieces of equipment and create complex test setups including transducers (such as current probes and shunts) to measure current into your DUT. The DC power analyser also eliminates the need to develop and debug programs to control a collection of instruments and take useful measurements because all the functions and measurements are available at the front panel. For even greater control and analysis functions, the DC Power analyser can be used with the 14585A Control and Analysis software. When automated bench setups are required, the fully programmable over GPIB, USB, LAN and is LXI compliant. This offers a flexible configuration to meet your power sourcing and analysis requirements.

Features and Benefits

• Ideal for R&D testing and design validation
• Large colour graphic display for easy viewing of complex data
• Connections and controls color-coded to the display for a fast and error-free setup
• 4-slot mainframe holds up to 600W of total power and up to 4 modules
• Voltmeter accuracy- Up to 0.025% +50μV, up to 18 bits
• Ammeter accuracy- Up to 0.025% +8nA, up to 18 bits
• Arbitrary waveform generator function- Bandwidth up to 100kHz, output power up to 500W
• Absolute maximum current measurement is 50A
• Scope function- Digitizes voltage and current at up to 200kHz, 512kpts, up to 18 bits
• Data logger function- Measurement interval from 20μs to 60 seconds, maximum of 500M readings per data log
• 4GB of non-volatile data storage for data log, scope traces, instrument settings

Keysight Power Supplies

Attribute Value
Absolute Maximum Current Measurement 50A
Absolute Maximum Power Measurement 600W
Maximum Voltage 240V ac
Best Voltage Measurement Accuracy 0.025 %
Best Current Measurement Accuracy 0.025 %
Display Type Graphic Display
Measurement Type Current, Voltage
Interface Type USB 2.0
Memory Capacity 4GB
Power Source Mains
Maximum Frequency 400Hz
Model Number p N6705C
Width 313mm
Height 194.7mm
Minimum Frequency 50 Hz
Weight 16kg
Dimensions 425.6 x 313 x 194.7mm
Maximum Operating Temperature +55°C
Minimum Operating Temperature 0°C
Length 425.6mm
Tillfälligt slut i lager – restorder för leverans 2020-04-20
Pris (ex. moms) Each
72 590,00 kr
(exkl. moms)
90 737,50 kr
(inkl. moms)
Per unit
1 +
72 590,00 kr
Related Products
RS Pro IPM242 clamp meter serves as a ...
RS Pro IPM242 clamp meter serves as a first line of defence for spot checking and verifying system conditions before deploying more specialised tools. Featuring a full range of diagnostic capabilities including phase sequence, power & power factor, total harmonics ...
Three-phase energy and power failure analyserPower and energy ...
Three-phase energy and power failure analyserPower and energy analysis in supply networksHarmonics analysis in accordance with EN 61000-4-7Network quality in accordance with EN50160 with statistical bar chartFlicker analysis as per standard EN 61000-4-15Recording of power-on operations and errorsAnalysis module ...
The 6813C AC power source/analyser from Keysight is ...
The 6813C AC power source/analyser from Keysight is a performance AC test soloution with 1750 VA maximum output power and a built in arbitrary waveform generator. 20 Vrms test signal (Option 001)High-speed measurements: 5.6 ms201 points list sweepVersatile PC connectivity ...
HMC8015 is the first compact tester for AC/DC ...
HMC8015 is the first compact tester for AC/DC load and standby current characterisation to enable measurements without extra requirements such as computers or remote infrastructure. It features a numerical and graphical display with 26 key parameters. Its performance and compliance ...