Hi-Force Single, Portable Low Height Hydraulic Cylinder, HPS100, 10T, 10mm stroke

  • RS-artikelnummer 808-078
  • Tillv. art.nr HPS100
  • Tillverkare / varumärke Hi-Force
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): GB
Produktdetaljer

Low Height Pad Cylinders-High Pressure

Combine minimum collapsed height with optimum stroke
They provide a short adjusting and lifting force in confined work areas
Steel stop rings further increase the cylinders capacity to withstand side loads and restrain the piston at full extension

//media.rs-online.com/t_line/L808056-01.gif

Low Height Cylinders

High quality single acting, spring return cylinders, manufactured from high strength alloy steels, and providing a minimum safety factor of 3:1
Piston rods are chrome plated to prevent corrosion and the use of pressure activated anti-extrusion seals, enhance performance and reliability
Heavy duty return springs, assist single acting pistons to retract fully. Steel stop rings further increase a cylinders capacity to withstand side loads and restrain the piston at full extension
All port connections are 3/8 in. NPT and each cylinder is fitted with a high flow, quick release, female half coupler as standard
All cylinders are individually tested to 125% of their working pressures and are issued with a manufacturers test certificate, and instruction leaflet
The capacities of all our range of high pressure cylinders are specified at a working pressure of 700 bar
For suitable oil see technical specification of Hydraulic Hand Pumps
Maintenance seal kits are available separately

Warning

  • Safety Note - High pressure hydraulic equipment can work at extremely high pressures and careful attention should be paid to working pressures when choosing accessories.
Specifikationer
Attribute Value
Manufacturer Series HPS
Single/Double Acting Single
Capacity 10t
Stroke 10mm
Closed Height 45mm
Extended Height 55mm
Cylinder Effective Area 14.4cm²
Oil Capacity 14cm³
Outside Diameter 81mm
Maximum Operating Pressure 700 bar
Weight 1.6kg
2 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
3 173,55 kr
(exkl. moms)
3 966,94 kr
(inkl. moms)
Enheter
Per unit
1 +
3 173,55 kr
Related Products
Hydraulic cylinders with a range of bore sizes ...
Description:
Hydraulic cylinders with a range of bore sizes and stroke lengths for general purpose and light duty applications. Manufactured to ISO 3320 and compatible with ISO mounting styles and fixings. Carbon steel bodyRecommended hydraulic medium: Mineral oil based fluidsNBR (Nitrile)/Polyurethane ...
Piston-type hand pumps offer completely self-contained units for ...
Description:
Piston-type hand pumps offer completely self-contained units for instant operation. Each pump consists of a pre-filled oil reservoir, pump head with external load release valve, and an operating lever. The two-speed model HP227 (807-895) enables rapid cylinder rod advancement until ...
Single acting cylinder pump-sets for lifting and push ...
Description:
Single acting cylinder pump-sets for lifting and push applications. The kit comes with a two-speed hand-pump which can reduce the required number of handle strokes by up to 78. The two-speed pump also requires less effort than a single speed ...
Mini cylinder conforming to ISO6432Low weight, corrosion resistant ...
Description:
Mini cylinder conforming to ISO6432Low weight, corrosion resistant constructionMagnetic piston as standardSingle and double acting versionsSpring return on single acting modelsEnd of stroke buffer cushioning for longer lifeMedium : Compressed air, filtered, lubricated or non-lubricatedOperating pressure : 10 bar ...