Hi-Force Single, Portable Low Height Hydraulic Cylinder, HPS51, 4.5T, 16mm stroke

  • RS-artikelnummer 808-062
  • Tillv. art.nr HPS51
  • Tillverkare / varumärke Hi-Force
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): GB
Produktdetaljer

Low Height Pad Cylinders-High Pressure

Combine minimum collapsed height with optimum stroke
They provide a short adjusting and lifting force in confined work areas
Steel stop rings further increase the cylinders capacity to withstand side loads and restrain the piston at full extension

//media.rs-online.com/t_line/L808056-01.gif

Low Height Cylinders

High quality single acting, spring return cylinders, manufactured from high strength alloy steels, and providing a minimum safety factor of 3:1
Piston rods are chrome plated to prevent corrosion and the use of pressure activated anti-extrusion seals, enhance performance and reliability
Heavy duty return springs, assist single acting pistons to retract fully. Steel stop rings further increase a cylinders capacity to withstand side loads and restrain the piston at full extension
All port connections are 3/8 in. NPT and each cylinder is fitted with a high flow, quick release, female half coupler as standard
All cylinders are individually tested to 125% of their working pressures and are issued with a manufacturers test certificate, and instruction leaflet
The capacities of all our range of high pressure cylinders are specified at a working pressure of 700 bar
For suitable oil see technical specification of Hydraulic Hand Pumps
Maintenance seal kits are available separately

Warning

  • Safety Note - High pressure hydraulic equipment can work at extremely high pressures and careful attention should be paid to working pressures when choosing accessories.
Specifikationer
Attribute Value
Manufacturer Series HPS
Single/Double Acting Single
Capacity 4.5t
Stroke 16mm
Closed Height 42mm
Extended Height 58mm
Cylinder Effective Area 6.4cm²
Oil Capacity 10cm³
Outside Diameter 60mm
Maximum Operating Pressure 700 bar
Weight 900g
Tillfälligt slut i lager – restorder för leverans 2020-02-27
Pris (ex. moms) Each
3 036,03 kr
(exkl. moms)
3 795,04 kr
(inkl. moms)
Enheter
Per unit
1 +
3 036,03 kr
Related Products
For lifting and pushing applications where flexibility and ...
Description:
For lifting and pushing applications where flexibility and high cycle requirements existNon-metallic bearings on the piston rod and the stop ring provide excellent wear resistance with low friction and high side load bearing capacity. Suitable for use in a diverse ...
Use where collapsed height is a premier requirement ...
Description:
Use where collapsed height is a premier requirement in a lifting, levelling or pushing applicationNon-metallic bearings on the piston rod and the stop ring provide excellent wear resistance with low friction and high side load bearing capacity.
Very low height cylinders combine minimum closed height ...
Description:
Very low height cylinders combine minimum closed height with maximum stroke to provide a short adjusting and lifting force in very confined work areasAll cylinders have a 6mm stroke and are manufactured to the same high standards as our existing ...
Enerpac RS-Series Hydraulic Cylinders are fitted with the ...
Description:
Enerpac RS-Series Hydraulic Cylinders are fitted with the exclusive Golden Ring design - a unique bearing design - which absorbs eccentric loads to protect the cylinder against abrasion, over-extension, and jamming for long, trouble-free operation.