Parker 3 → 8bar 0.1 → 30s Pneumatic Timer, -15 → +60°C

  • RS-artikelnummer 410-517
  • Tillv. art.nr PRT-A10
  • Tillverkare / varumärke Parker
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer
//media.rs-online.com/t_line/L267136-01.gif
//media.rs-online.com/t_line/L267136-02.gif
//media.rs-online.com/t_line/L267136-03.gif
//media.rs-online.com/t_line/L267137-01.gif

Parker Pneumatic Timer

The Parker PRT series pneumatic time delay relay requires operating pressure ranging between 3bar and 8bar. This ON delay timer has a timing range from 0.1 seconds to 30 seconds. This timer has maintained input signal during an adjustable time after which a regenerated output appears. It is consists of a solenoid coil/core, operating spring, timing disk, filter and diaphragm. The core moves up into the coil when it has been energized and this leads to pressure on the diaphragm. The diaphragm moves into the top chamber which un-traps the air through the timing disk. By altering the needle valve you can adjust the amount of delay.
Note:
All the logic units require mounting on a separate 2 or 3 port base, available separately. Logic units have an input (green) and output (red) pressure indicator to show the state of the respective signal. Units are supplied with two captive screws for mounting on all types of base and sealing O-rings are in the bottom of each unit.

Features and Benefits

Long life expectancy
Polyamide body material
2 or 3-Port Subbase mount
Response time is 2 millisecond to 3 millisecond
Operating temperature ranging between -15°C and 60°C
Very reliable

Certifications

ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007

Specifikationer
Attribute Value
Manufacturer Series PRT
Minimum Operating Pressure 3bar
Maximum Operating Pressure 8 bar
Minimum Operating Temperature -15°C
Maximum Operating Temperature +60°C
Minimum Time 0.1s
Maximum Time 30s
13 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
1 112,28 kr
(exkl. moms)
1 390,35 kr
(inkl. moms)
Enheter
Per unit
1 - 4
1 112,28 kr
5 +
1 078,36 kr
Related Products
Provide a selectable delay time ON or OFF ...
Description:
Provide a selectable delay time ON or OFF according to module used, after the operation of the contactor moduleMaybe used with contactor modules (100-C Series) or control relay modules (700-CF Series).
Professionally assembled contactor Timers by Schneider Electric provide ...
Description:
Professionally assembled contactor Timers by Schneider Electric provide you with the option of delaying timed functions on your control circuit linked via the main contactor. This can be beneficial in controlling pre-set on/off operations cyclically or at a defined interval, ...
The Crouzet 81 series single impulse generator has ...
Description:
The Crouzet 81 series single impulse generator has operating pressure ranging between 2bar and 8 bar. This sub-base mount timer transforms a maintained signal into a single pulse. The output is switched via the negative output relay when an input ...
Fitted between a trip valve and directional control ...
Description:
Fitted between a trip valve and directional control valve when it is necessary to eliminate a trapped or locked pilot signal that would otherwise prevent the control valve from resetting. When an input signal is applied, it generates a short ...