Festo Soft Start Valve Pilot/Spring G 1/2 MS6 Series

  • RS-artikelnummer 122-8226
  • Tillv. art.nr MS6-DL-1/2
  • Tillverkare / varumärke Festo
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): HU
Produktdetaljer

MS-DL Series Soft Start Valves

Festo MS-DL series pneumatically actuated soft start valves allow pressure to be gradually built up when turned ON preventing sudden and erratic movements at the actuator. The valve uses a direct external pilot for switching and switching can be adjusted for the required time delay. A pressure gauge or sensor can be installed for system monitoring and a module connector for connection to MS4 or MS6 combination air preparation units is available.

Features and Benefits

Switching pressure approx. 50% of set pressure
Piston poppet valve design
Available with G1/4 or G1/2 ports
Can be fitted to MS4 and MS6 Series Modular units
Non-reversible flow direction
Assembly possible in any position

Soft Start and Quick Exhaust Valves

Specifikationer
Attribute Value
Manufacturer Series MS6
Connection Port Thread G 1/2
Actuation Type Pilot/Spring
Body Material Aluminium
Maximum Flow Rate 6400 (Relief Direction) L/min, 6450 (Main Flow Direction) L/min
Minimum Operating Pressure 4bar
Minimum Operating Temperature -10°C
Maximum Operating Temperature +60°C
Maximum Operating Pressure 18 bar
Hazardous Area Certification ATEX
Thread Size 1/2in
Number of Positions 2
Number of Ports 2
Thread Standard BSPP
I lager för leverans inom 2 arbetsdagar
Pris (ex. moms) Each
761,00 kr
(exkl. moms)
951,25 kr
(inkl. moms)
Enheter
Per unit
1 +
761,00 kr
Nästa dag-leverans inte möjlig
Related Products
Overlap-free spool valves with AS-i controlHigh flow and ...
Description:
Overlap-free spool valves with AS-i controlHigh flow and fast switching timesPeak pressure resistance → 12 barDigital inputs and enhanced addressed mode3 freely configurable directions for flat lead.
Modular solenoid valves and accessories that have been ...
Description:
Modular solenoid valves and accessories that have been designed for manifold assembly, and DIN rail mounting.The valves act as a functional interface between electrical/electronic control systems and pneumatic drives.Main Features:. Electrical & air connections via sub base.
Modular with orientable solenoid coils and plugs for ...
Description:
Modular with orientable solenoid coils and plugs for easy installation. Choice of solenoid coils, ordered separatelyCaptive ’O’ ring soft seal, spool valve designElectrical connection 22mm ind stdProtection rating IP65Zinc die cast bodyAluminium/glass filled nylon end capsNitrile seals.
Solenoid valves… compact performance CPE. Width 10/14/18/24mmInternal or ...
Description:
Solenoid valves… compact performance CPE. Width 10/14/18/24mmInternal or external pilot air (S type)Flow rate: 350, 800, 1500, 2900 l/min Individual or manifold mountingSuitable for vacuumRobust, reliable, cost effectiveStraightforward installation, fast valve replacementIndividual electrical connection, choice of ...