Festo Pneumatic Cylinder 16mm Bore, 100mm Stroke, DSNU Series, Double Acting

  • RS-artikelnummer 121-4709
  • Tillv. art.nr DSNU-16-100-PPS-A
  • Tillverkare / varumärke Festo
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): DE
Produktdetaljer

DSNU Series Roundline Cylinders - Self Adjusting Pneumatic Cushioning

Festo DSNU series round pneumatic cylinders with self adjusting pneumatic cushioning at both ends of the actuator barrel. Featuring a stainless steel piston rod within a 3 component system that provides excellent running performance and long service life. These double acting pneumatic actuators have dual connection ports for compressed air to be applied for advancing and retracting the piston rod in a linear motion. An extensive range of accessories makes it possible to install the DSNU cylinders virtually anywhere.

Self Adjusting Pneumatic Cushioning

The DSNU PPS type self adjusting cushioning pneumatic cylinders provide ideal cushion performance without the need for manual adjustments. The self adjusting cushioning gives a gentle and dynamic travel into the end position, even with changing loads and speeds. Equipped with a special piston as an extension to the main piston the design controls venting of the air cushion that has built up, as a result, no adjusting screw is necessary. Assembly and setting time is reduced using self adjusting cushioning that results in a high potential saving of working hours.

Features and Benefits

Conforms to ISO 6432 providing standardised metric mounting dimensions
Stainless steel piston rod with threaded connector
Wide range of stroke length and bore size variants that can be configured to suit a broad range of applications.
Long service life
Double acting operation

How do I mount the pneumatic cylinder?

The DSNU series pneumatic round actuators conform to ISO 6432 standards allowing them to be mounted in any position to suit the required application. The ISO 6432 standard establishes metric mounting dimensions for cylinders providing interchangeability of commonly used hydraulic and pneumatic cylinders. Optional mounting accessories provide further flexibility allowing the cylinder to be attached with a swivel bracket for free movement, foot mounted for support under high loads or combined with other actuators to give a wider range of movement.

Festo Roundline Cylinders

Specifikationer
Attribute Value
Manufacturer Series DSNU
Action Double
Bore 16mm
Stroke 100mm
Maximum Operating Pressure 10 bar
Pneumatic Connection M5
Piston Rod Thread Gender Male
Cushioning Type Air
Dimensions 20 x 211mm
Weight 135.9g
Maximum Operating Temperature +80°C
Diameter 20mm
Minimum Operating Temperature -20°C
Length 211mm
I lager för leverans inom 2 arbetsdagar
Pris (ex. moms) Each
568,99 kr
(exkl. moms)
711,24 kr
(inkl. moms)
Enheter
Per unit
1 - 4
568,99 kr
5 - 9
546,23 kr
10 +
523,47 kr
Nästa dag-leverans inte möjlig
Related Products
SMC Dual-Rod Cylinders with slide bearings (CXSM type) ...
Description:
SMC Dual-Rod Cylinders with slide bearings (CXSM type) or ball bearing slides (CXSL type), suitable for 'pick-and-place' applications, operating with non-lubricated, filtered, compressed air. Dual-Rod Cylinders feature high non-rotational accuracy, dual port locations, and standard magnetic sensing and buffer ...
SMC MGP Compact Guide slide-bearing cylinders with End ...
Description:
SMC MGP Compact Guide slide-bearing cylinders with End Lock (that holds the cylinder in position, even if the air supply is disconnected), offer mounting points on the top, side, or bottom (and a T-slot mount option), with pneumatic ports on ...
Bore sizes 6, 10, 16mmMagnetic piston standardCompact designLubrication ...
Description:
Bore sizes 6, 10, 16mmMagnetic piston standardCompact designLubrication not requiredMale-threaded rod endIP67 ratedProof pressure 1.05 barOperating pressure 1.2 bar, 6mm dia and 0.6 bar, 10mm/16mm dia (min) 7 bar (max)Ambient and fluid temperature -10ºC to +60°CStroke tolerance +1.0mm, -0mmRubber bumper ...
Mini cylinder conforming to ISO6432Low weight, corrosion resistant ...
Description:
Mini cylinder conforming to ISO6432Low weight, corrosion resistant constructionMagnetic piston as standardSingle and double acting versionsSpring return on single acting modelsEnd of stroke buffer cushioning for longer lifeMedium : Compressed air, filtered, lubricated or non-lubricatedOperating pressure : 10 bar ...