SMC Air Regulator G 3/8 20L/min, 0.05 → 0.85Mpa

  • RS-artikelnummer 890-3187
  • Tillv. art.nr AR30-F03BG-B
  • Tillverkare / varumärke SMC
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): JP
Produktdetaljer

SMC Air Regulator AR20-B - AR40-B

SMC’s new AR-B series pneumatic regulators with a pressure range setting of 0.05 to 0.7 MPa or 0.02 to 0.2 MPa. The modular design of these pneumatic regulators allows connection to other SMC air preparation equipment and the AR-B series can be mounted using a bracket or panel mounted.

Note

An integral Pressure Gauge is shown on the picture for reference only. It is not supplied as a part of the set and has to be bought separately.

Specifikationer
Attribute Value
Port Connection G 3/8
Minimum Outlet Pressure 0.05MPa
Maximum Outlet Pressure 0.85MPa
Maximum Input Pressure 1MPa
Pressure Gauge Port Size G 1/8
Port Connection Thread Size 3/8 in
Pressure Gauge Port Thread Size 1/8 in
Maximum Flow Rate 20L/min
Integral Check Valve Without Check Valve
Port Connection Thread Standard G
Minimum Operating Temperature -5°C
Maximum Operating Temperature 60°C
Proof Pressure 1.5MPa
Overall Length 53mm
Pressure Gauge Port Thread Standard G
Overall Width 59mm
Overall Height 116mm
Overall Dimensions 53 x 59 x 116mm
I lager för leverans inom 2 arbetsdagar
Pris (ex. moms) Each
341,28 kr
(exkl. moms)
426,60 kr
(inkl. moms)
Enheter
Per unit
1 - 4
341,28 kr
5 - 9
330,87 kr
10 +
320,20 kr
Nästa dag-leverans inte möjlig
Related Products
Electro-pneumatic pressure regulator range from SMC. ITV series ...
Description:
Electro-pneumatic pressure regulator range from SMC. ITV series regulators allow proportional control of the regulators output pressure with an electrical input signal. Increasing the input signal will increase the pilot pressure operating a diaphragm controlling air between the supply and ...
SMC's Membrane air dryer series IDG is available ...
Description:
SMC's Membrane air dryer series IDG is available in a single unit or combination unit style. IDG/M models combine a mist separator and micro mist separator with a single unit. IDG/V models combine a regulator with the IDG/M model. Options ...
Integral 1/2 or 3/4 ports (BSPP & NPT)Robust ...
Description:
Integral 1/2 or 3/4 ports (BSPP & NPT)Robust but lightweight aluminium constructionSecondary pressure ranges 2, 4, 8 & 17 barSecondary aspiration plus balanced poppet provides quick response and accurate pressure regulationRelieving & Non-relieving typesNon-rising knob.
Air requirements; Dry, filtered to 0.3μmPrecise setting accuracy ...
Description:
Air requirements; Dry, filtered to 0.3μmPrecise setting accuracy ±0.2% of full spanRepeatability ±0.5% of full spanTemperature range -5°C to +60°CHigh relief flow capacity for high balance performanceSuitable for standalone use or integration into an SMC modular FRL assembly (AC3000 series)Weight ...