Festo Pneumatic Regulator 36 → 124L/min Push In 8 mm

  • RS-artikelnummer 125-9899
  • Tillv. art.nr LRMA-QS-8
  • Tillverkare / varumärke Festo
Lagstiftning och ursprungsland
COO (Country of Origin): JP

Festo LRMA Series Pressure Regulators

Festo LRMA series pressure regulator maintains a constant output pressure on the secondary side independent of pressure fluctuations on the primary side and air consumption. The primary pressure at the screw-in thread is reduced when air is exhausted from the QS push in connector. The LRMA series features a pressure gauge to give visible feedback from the unit.

Features and Benefits

Visible pressure gauge indicator
With threaded and push in connector
Push in connector can be rotated 360°

Festo LRMA-QS-8 Pressure Regulator

The LRMA-QS-8 from Festo is a pneumatic pressure regulator which has been designed to control the output pressure at a constant rate. The convenient push in fitting system offers complete flexibility for your pneumatic connections.

Features and Benefits

• Pressure regulator with pressure gauge
• Easy to use with QS push in connector at both ends
• For tubing with 0.D. 8 mm
• Constant output pressure
• Can be mounted through mounting holes
• Mounted in any position
• Operating temperature 0 to 60 °C
• Minimal dimensions

Attribute Value
Port Connection Push In 8 mm
Maximum Input Pressure 9bar
Maximum Flow Rate 124L/min
Typical Flow Rate 36 → 124L/min
Minimum Operating Temperature 0°C
Maximum Operating Temperature +60°C
Overall Height 67.5mm
Overall Length 57mm
Overall Width 19mm
Overall Dimensions 57 x 19 x 67.5mm
22 I lager för leverans inom 1 arbetsdagar
Inom 2 arbetsdag(ar) (UK lager)
Pris (ex. moms) Each
680,99 kr
(exkl. moms)
851,24 kr
(inkl. moms)
Per unit
1 +
680,99 kr
Related Products
The 651 Series offers a complete range of ...
The 651 Series offers a complete range of modular, easy-to-assemble air preparation products. It includes the several filtration options (particulate, coalescing and adsorbing) with an extensive selection of bowl types and drains. Extended temperature range capabilities (-40°F to 176°F / ...
Integral 1/2 or 3/4 ports (BSPP & NPT)High ...
Integral 1/2 or 3/4 ports (BSPP & NPT)High efficiency 5 micron element as standardExcellent water removal efficiencyRobust but lightweight aluminium constructionPositive bayonet latch to ensure correct & safe fittingSecondary pressure ranges 2, 4, 8 & 17 barSecondary aspiration plus balanced ...
National Association of Corrosion Engineer (NACE) standard MR-01-75 ...
National Association of Corrosion Engineer (NACE) standard MR-01-75 (1980)Withstands harsh, corrosive environmentsIdeal for off-shore applications, food, chemical and petroleum process plantsMaximum operating temperature +65°CGlass filled thermoplastic spring cageUnits can be joined together using barrel nipple ...
These high capacity units, with large valve and ...
These high capacity units, with large valve and diaphragm, have excellent flow and regulation characteristics. The redesigned, upgraded products are fully interchangeable with existing Olympian® 15 series units. Each fits into a G 3/4 or G1 ported yoke assembly, ordered ...