RS PRO Pneumatic Profile Cylinder 50mm Bore, 50mm Stroke, CDEM Series, Double Acting

  • RS-artikelnummer 480-2248
  • Tillverkare / varumärke RS PRO
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): IT
Produktdetaljer

VDMA Profile Range Ø 32-50mm

Conforms to Standards: VDMA 24562; (1992); ISO 6431
Double-acting and through-rod versions
Magnetic piston as standard
Clean line cylinder
Stainless steel piston rod
Integral reed switch slot
Seal kits available (a set of O-rings to enable reconditioning of RS VDMA cylinders)
Complete with piston rod nut

Note

The table below shows theoretical cylinder thrusts in Newtons according to cylinder bore, stroke out or in and air pressure. These figures should be multiplied by a factor of 0.85 to account for cylinder efficiency.

//media.rs-online.com/t_line/L304397-01.gif
//media.rs-online.com/t_line/L304397-02.gif
//media.rs-online.com/t_line/L480211-01.gif
Specifikationer
Attribute Value
Manufacturer Series CDEM
Action Double
Bore 50mm
Stroke 50mm
VDMA Standard 24562
ISO Standard 6431
Maximum Operating Pressure 10 bar
Cushioning Type Rubber
Dimensions 193 x 65 x 65mm
Height 65mm
Length 193mm
Maximum Operating Temperature +80°C
Minimum Operating Temperature -20°C
Width 65mm
1 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
1 001,15 kr
(exkl. moms)
1 251,44 kr
(inkl. moms)
Enheter
Per unit
1 +
1 001,15 kr
Related Products
ISO Standard compact cylinder with hard anodized aluminium ...
Description:
ISO Standard compact cylinder with hard anodized aluminium body. Available as double acting with magnetic piston as standard. ISO standard 21287CompactMagnetic sensing.
Compact single and double acting cylinders, considerably shorter ...
Description:
Compact single and double acting cylinders, considerably shorter than corresponding tie rod designs. Space and weight savingMagnetic pistonProof pressure 15barOperating pressure range 0.05MPa (0.51kgf/cm2) min to 10bar maxSupplied with tapered and parallel ports.
SMC CQM Compact Guided/Guide Rod cylinders can accommodate ...
Description:
SMC CQM Compact Guided/Guide Rod cylinders can accommodate direct loads, offer a lateral load resistance that is two to four times greater than SMC series CQ cylinders, and include mounting points that are compatible with SMC CQS and CQ2 series ...
SMC MGP Compact Guide slide-bearing cylinders with End ...
Description:
SMC MGP Compact Guide slide-bearing cylinders with End Lock (that holds the cylinder in position, even if the air supply is disconnected), offer mounting points on the top, side, or bottom (and a T-slot mount option), with pneumatic ports on ...