Festo Pneumatic Cylinder 80mm Bore, 80mm Stroke, DSBC Series, Double Acting

  • RS-artikelnummer 121-5228
  • Tillv. art.nr DSBC-80-80-PPSA-N3
  • Tillverkare / varumärke Festo
Lagstiftning och ursprungsland
COO (Country of Origin): DE

DSBC Series Profile Cylinders - Self Adjusting Pneumatic Cushioning

Festo DSBC series pneumatic cylinders with self adjusting pneumatic cushioning at both ends of the actuator barrel. Featuring a high-alloy steel piston rod provides excellent running performance, low overall weight and long service life. These double acting pneumatic actuators have dual connection ports for compressed air to be applied for advancing and retracting the piston rod in a linear motion. Magnetic piston rods allow contactless position detection via a proximity sensor mounted in slots along the cylinder body.

Self Adjusting Pneumatic Cushioning

The DSBC PPS type self adjusting cushioning pneumatic cylinders provide ideal cushion performance without the need for manual adjustments. The self adjusting cushioning gives a gentle and dynamic travel into the end position, even with changing loads and speeds. Equipped with a special piston as an extension to the main piston the design controls venting of the air cushion that has built up, as a result, no adjusting screw is necessary. Assembly and setting time is reduced using self adjusting cushioning that results in a high potential saving of working hours.

Features and Benefits

Corresponds to ISO 15552 standard
Slots for flush mounting proximity sensors
Low friction design allowing for continuous operation
Adjustable end cushioning helping to reduce noise and vibration
High-alloy steel piston rod with threaded connector
Wide range of stroke length and bore size variants that can be configured to suit a broad range of applications
Double acting operation

How do I mount the pneumatic actuator?

The DSBC series pneumatic round actuators conform to ISO 15552 standards allowing them to be mounted in any position to suit the required application. The ISO 15552 standard establishes metric mounting dimensions for cylinders providing interchangeability of commonly used hydraulic and pneumatic cylinders. Optional mounting accessories provide further flexibility allowing the cylinder to be attached with a swivel bracket for free movement, foot mounted for support under high loads or combined with other actuators to give a wider range of movement.

Festo ISO 15552 Proflie Cylinders

Attribute Value
Manufacturer Series DSBC
Action Double
Bore 80mm
Stroke 80mm
Pneumatic Connection G 3/8
VDMA Standard 24562
ISO Standard 15552
Piston Rod Thread Gender Male
Maximum Operating Pressure 12 bar
Cushioning Type Air
Dimensions 297.6 x 93 x 93mm
Weight 2.7kg
Maximum Operating Temperature +80°C
Width 93mm
Height 93mm
Length 297.6mm
Stroke Interval Weight 92 g @ 10 mm Stroke
Test Weight 2660 g @ 0 mm Stroke
Minimum Operating Temperature -20°C
I lager för leverans inom 2 arbetsdagar
Pris (ex. moms) Each
2 026,09 kr
(exkl. moms)
2 532,61 kr
(inkl. moms)
Per unit
1 +
2 026,09 kr
Nästa dag-leverans inte möjlig
Related Products
Magnetic piston as standard across rangeStainless steel piston ...
Magnetic piston as standard across rangeStainless steel piston rodAnodised aluminium alloy barrel and end capsPolyurethane nitrile rubber sealsVery compact - approximately one third the length of a corresponding ISO modelSpring return on single-acting modelsTemperature range -5°C to +80°C (consult our ...
Festo DFM series pneumatic guided cylinders are double ...
Festo DFM series pneumatic guided cylinders are double acting drive and guide unit in a single housing. Four plain slide bearings on the large diameter guide rods provide high rigidity suitable for high loads. Designed for high load pneumatic applications ...
Robust, double-acting guide cylinders with magnetic piston. Bosch ...
Robust, double-acting guide cylinders with magnetic piston. Bosch Rexroth Guide Cylinders include top and side ports, and feature stainless steel guide rods. The plain-bearing cylinders offer elastic cushioning, and may be directly mounted to one another. Guide cylinders are suitable ...
ISOLine™ profile cylinder, 50mm diameter, 80mm stroke, ISO15552. ...
ISOLine™ profile cylinder, 50mm diameter, 80mm stroke, ISO15552. High performance, stability and reliabilityPolyurethane seals ensure efficient low friction operation and long lifeSwitches can be mounted flush with the profile barrel.