SMC Double Action Pneumatic Pin Cylinder, CDJP2B6-10D

  • RS-artikelnummer 547-603
  • Tillv. art.nr CDJP2B6-10D
  • Tillverkare / varumärke SMC
Datablad
Lagstiftning och ursprungsland
Uppfyller ej
COO (Country of Origin): JP
Produktdetaljer

Cylinders

Bore sizes 6, 10, 16mm
Magnetic piston standard
Compact design
Lubrication not required
Male-threaded rod end
IP67 rated
Proof pressure 1.05 bar
Operating pressure 1.2 bar, 6mm dia and 0.6 bar, 10mm/16mm dia (min) 7 bar (max)
Ambient and fluid temperature -10ºC to +60°C
Stroke tolerance +1.0mm, -0mm
Rubber bumper cushion at both ends

Specifikationer
Attribute Value
Manufacturer Series CJP2
Action Double
Rods Single
Bore 6mm
Stroke 10mm
Piston Speed 50 500mm/s
Maximum Operating Pressure 0.7 MPa
Cushioning Type Rubber
Port Connection M3 x 0.5
Dimensions 43 x 14 x 16.5mm
Weight 18g
Minimum Piston Speed 50mm/s
Minimum Operating Temperature -10°C
Maximum Piston Speed 500mm/s
Height 16.5mm
Length 43mm
Width 14mm
Maximum Operating Temperature +70°C
16 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
270,03 kr
(exkl. moms)
337,54 kr
(inkl. moms)
Enheter
Per unit
1 - 4
270,03 kr
5 - 9
261,80 kr
10 +
253,35 kr
Related Products
Compact single and double acting cylinders, considerably shorter ...
Description:
Compact single and double acting cylinders, considerably shorter than corresponding tie rod designs. Space and weight savingMagnetic pistonProof pressure 15barOperating pressure range 0.05MPa (0.51kgf/cm2) min to 10bar maxSupplied with tapered and parallel ports.
The solution for a linear-actuator subject to high ...
Description:
The solution for a linear-actuator subject to high loads. Ideal for material handling applications. Two types of guide rod bearing for different applications. The overall package is very compact and pre-tapped mounting holes ensure easy attachment of fixtures. Compact guide ...
SMC Dual-Rod Cylinders with slide bearings (CXSM type) ...
Description:
SMC Dual-Rod Cylinders with slide bearings (CXSM type) or ball bearing slides (CXSL type), suitable for 'pick-and-place' applications, operating with non-lubricated, filtered, compressed air. Dual-Rod Cylinders feature high non-rotational accuracy, dual port locations, and standard magnetic sensing and buffer ...
The SMC MGP series of compact guide cylinder ...
Description:
The SMC MGP series of compact guide cylinder is designed for high side load applications found in material handling, lifting and stopping. The MGP series incorporates the cylinder body as part of the guide body to give an ultra-compact design. ...