SMC Elbow Connector

  • RS-artikelnummer 122-5611
  • Tillv. art.nr KQ2L16-00A
  • Tillverkare / varumärke SMC
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): JP
Produktdetaljer

Union Elbow KQ2L

The KQ2L union elbow fittings from SMC are quick and easy to install into your pneumatic fittings. These KQ2L union elbows are also more compact in design which means that these connectors can be used within a confined space. Union elbow fittings are to used to connect tubing at right angles. The new KQ2 range of products are lighter than previous models and have the advantage of improved insertion and removal forces.

Can be used under a wide range of pressures from a low vacuum to 1MPa
Low force required for fitting and removal
Compact dimensions for use within smaller spaces

Tube-to-Tube Fittings & Plugs

Sealant coated threads minimise assembly time. The fittings can be used on vacuum or positive pressure lines. Suitable for use with nylon, soft nylon or polyurethane tube for compressed air or water (general industry) conveyance.

Maximum operating pressure 10 bar
Maximum vacuum operating pressure -100kPa
Proof pressure 3MPa
Ambient and fluid temperature -5 to +60°C (water 0 - 40°C)

I lager för leverans inom 2 arbetsdagar
Pris (ex. moms) 1 Bag of 5
563,84 kr
(exkl. moms)
704,80 kr
(inkl. moms)
Påse(ar)
Per Bag
Per unit*
1 +
563,84 kr
112,768 kr
Nästa dag-leverans inte möjlig
Related Products
The SYJ series of valves have low power ...
Description:
The SYJ series of valves have low power consumption and therefore decreased engineering costs. Their space saving design means that the SYJ valves can be individually mounted onto sub plates or configured onto base mounted manifolds. These SYJ700 & 7000 ...
These valves can be used singly or with ...
Description:
These valves can be used singly or with a manifold system. Low power consumption enables direct operation by PLC. They have a Non locking manual override. Range of 5//2 and 5//3 valves with electrical control for assembly on G1/8" manifold.Connector ...
A quick, low cost method of assembling low ...
Description:
A quick, low cost method of assembling low pressure lines. This push lock system allows for on-site hose assembly to the required customised length. Assembled in seconds without the need for clamps, bands, clips or wires. The hose is a ...
Connection of tubing at a 90゚ angle to ...
Description:
Connection of tubing at a 90゚ angle to a threaded port. Solid construction and compactExternal shapes easy to cleanComponents comply with FDA standard, and 1935/2004/EC regulationExcellent resistance to corrosionIndividual unit quality control and dating in order to guarantee quality and ...