Norgren Pneumatic Compact Cylinder 32mm Bore, 15mm Stroke, RM/92000/M Series, Double Acting

  • RS-artikelnummer 509-7992
  • Tillv. art.nr RM/92032/M/15
  • Tillverkare / varumärke IMI Norgren
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): GB
Produktdetaljer

Cylinders

Magnetic piston as standard across range
Stainless steel piston rod
Anodised aluminium alloy barrel and end caps
Polyurethane nitrile rubber seals
Very compact - approximately one third the length of a corresponding ISO model
Spring return on single-acting models
Temperature range -5°C to +80°C (consult our technical department for use below +2°C)

//media.rs-online.com/t_line/L156716-01.gif
//media.rs-online.com/t_line/L192875-02.gif
//media.rs-online.com/t_line/L192885-01.gif
Specifikationer
Attribute Value
Stroke 15mm
Bore 32mm
Action Double
Manufacturer Series RM/92000/M
Cushioning Type Not Cushioned
Dimensions 50.5 x 45 x 45mm
Length 50.5mm
Width 45mm
Height 45mm
Maximum Operating Pressure 10 bar
Minimum Operating Temperature -5°C
Maximum Operating Temperature +80°C
Weight 610g
6 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
850,90 kr
(exkl. moms)
1 063,62 kr
(inkl. moms)
Enheter
Per unit
1 - 4
850,90 kr
5 +
824,84 kr
Related Products
Compact single and double acting cylinders, considerably shorter ...
Description:
Compact single and double acting cylinders, considerably shorter than corresponding tie rod designs. Space and weight savingMagnetic pistonProof pressure 15barOperating pressure range 0.05MPa (0.51kgf/cm2) min to 10bar maxSupplied with tapered and parallel ports.
SMC CQM Compact Guided/Guide Rod cylinders can accommodate ...
Description:
SMC CQM Compact Guided/Guide Rod cylinders can accommodate direct loads, offer a lateral load resistance that is two to four times greater than SMC series CQ cylinders, and include mounting points that are compatible with SMC CQS and CQ2 series ...
SMC Dual-Rod Cylinders with slide bearings (CXSM type) ...
Description:
SMC Dual-Rod Cylinders with slide bearings (CXSM type) or ball bearing slides (CXSL type), suitable for 'pick-and-place' applications, operating with non-lubricated, filtered, compressed air. Dual-Rod Cylinders feature high non-rotational accuracy, dual port locations, and standard magnetic sensing and buffer ...
SMC MGP Compact Guide slide-bearing cylinders with End ...
Description:
SMC MGP Compact Guide slide-bearing cylinders with End Lock (that holds the cylinder in position, even if the air supply is disconnected), offer mounting points on the top, side, or bottom (and a T-slot mount option), with pneumatic ports on ...