Norgren Pneumatic Compact Cylinder 20mm Bore, 10mm Stroke, RM/92000/M Series, Double Acting

  • RS-artikelnummer 156-8030
  • Tillv. art.nr RM/92020/M/10
  • Tillverkare / varumärke IMI Norgren
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): GB
Produktdetaljer

Cylinders

Magnetic piston as standard across range
Stainless steel piston rod
Anodised aluminium alloy barrel and end caps
Polyurethane nitrile rubber seals
Very compact - approximately one third the length of a corresponding ISO model
Spring return on single-acting models
Temperature range -5°C to +80°C (consult our technical department for use below +2°C)

//media.rs-online.com/t_line/L156716-01.gif
//media.rs-online.com/t_line/L192875-02.gif
//media.rs-online.com/t_line/L192885-01.gif
Specifikationer
Attribute Value
Stroke 10mm
Bore 20mm
Action Double
Manufacturer Series RM/92000/M
Cushioning Type Not Cushioned
Dimensions 42 x 32 x 32mm
Length 42mm
Width 32mm
Maximum Operating Pressure 10 bar
Height 32mm
Weight 220g
Maximum Operating Temperature +80°C
Minimum Operating Temperature -5°C
6 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
665,14 kr
(exkl. moms)
831,42 kr
(inkl. moms)
Enheter
Per unit
1 - 4
665,14 kr
5 +
644,83 kr
Related Products
Single and double-acting compact short-stroke cylinders, operating with ...
Description:
Single and double-acting compact short-stroke cylinders, operating with lubricated or non-lubricated filtered compressed air. CO5 series cylinders are easy to install in confined spaces, easy to clean, and offer good corrosion resistance. The cylinders are supplied pre-lubricated (for applications where ...
The CQS Series of Compact Cylinders is available ...
Description:
The CQS Series of Compact Cylinders is available for those small bore cylinder applications. Both switch capable and non-switch capable body styles are the same. Space and weight savingMagnetic or non-magnetic pistons availableProof pressure 15 barInternal thread rod ends Nitrile ...
Compact single and double acting cylinders, considerably shorter ...
Description:
Compact single and double acting cylinders, considerably shorter than corresponding tie rod designs. Space and weight savingMagnetic pistonProof pressure 15barOperating pressure range 0.05MPa (0.51kgf/cm2) min to 10bar maxSupplied with tapered and parallel ports.
SMC CQM Compact Guided/Guide Rod cylinders can accommodate ...
Description:
SMC CQM Compact Guided/Guide Rod cylinders can accommodate direct loads, offer a lateral load resistance that is two to four times greater than SMC series CQ cylinders, and include mounting points that are compatible with SMC CQS and CQ2 series ...