SMC Membrane G 3/8 75 (Outlet) L/min, 93 (Inlet) L/min Pneumatic Air Dryer 3/8 +50°C -5°C, 1Mpa

  • RS-artikelnummer 884-9241
  • Tillv. IDG30LA-F03
  • Tillverkare / varumärke SMC
Lagstiftning och ursprungsland
COO (Country of Origin): JP

IDG Series, Membrane Air Dryer

SMC's Membrane air dryer series IDG is available in a single unit or combination unit style. IDG/M models combine a mist separator and micro mist separator with a single unit. IDG/V models combine a regulator with the IDG/M model. Options available include one-touch fitting exhaust of purge air. If purged air is not exhausted around membrane air dryer, air is exhausted with tubing away from its dryer.

A reliable, efficient and an economical alternative to pressure swing and refrigerant dryer technologies.

Compact and lightweight
No power supply required
Discharged air noise reduced with in-built silencer
No vibration or heat discharge
Modular design for additional filtration
Membrane air dryer series
Single unit style
Various sizes available
Port sizes: 1/8" to 1/2"


Flow rates measured as outlet/purge l/min

Dry Air Systems

Compressed air is an essential power source that is widely used throughout industry. This safe, powerful and reliable utility can be the most important part of a production process. However compressed air will contain water, dirt, wear particles, bacteria and even degraded lubricating oil which all mix together to form an unwanted abrasive sludge. This sludge, often acidic, rapidly wears tools and pneumatic machinery, block valves and orifices causing high maintenance and costly leaks. It also corrodes piping systems and can bring a production process to an extremely expensive standstill. Only compressed air that is totally clean and dry will ensure maximum savings.

Attribute Value
Manufacturer Series IDG
Type Membrane
Inlet Port Size G 3/8
Outlet Port Size G 3/8
Dew Point -40°C
Maximum Flow Rate 75 (Outlet) L/min, 93 (Inlet) L/min
Typical Flow Rate 75L/min
Outlet Port - Thread Size 3/8
Maximum Ambient Operating Temperature +50°C
Minimum Ambient Operating Temperature -5°C
Minimum Process Operating Temperature -5°C
Overall Height 70mm
Inlet Port Thread Standard G
Outlet Port - Thread Standard G
Maximum Operating Inlet Pressure 1MPa
Overall Length 291mm
Inlet Port - Thread Size 3/8
Overall Width 70mm
Minimum Operating Inlet Pressure 0.3MPa
Ambient Operating Temperature Range -5 → +50°C
Overall Dimensions 291 x 70 x 70mm
Process Operating Temperature Range -5 → +50°C
Maximum Process Operating Temperature +50°C
I lager för leverans inom 2 arbetsdagar
Pris (ex. moms) Each
9 387,65 kr
(exkl. moms)
11 734,56 kr
(inkl. moms)
Per unit
1 +
9 387,65 kr
Nästa dag-leverans inte möjlig