Siemens PLC Power Supply 3RX950 Series AS-I Power Supply Unit, 120 V ac, 230 V ac, 30V dc, 5 A 125 x 70 x 125 mm

  • RS-artikelnummer 746-6117
  • Tillv. art.nr 3RX9502-0BA00
  • Tillverkare / varumärke Siemens
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): RO
Produktdetaljer
//media.rs-online.com/t_line/L316042-01.gif

Siemens Power Supply Module

The Siemens 30 Vdc power supply module is designed to use with AS-interface PLCs. The supply line voltage ratings are 120ac/230Vac and output current is 5A.
Actuator Sensor Interface, AS-I
AS-I is a method of providing communication from simple discrete components such as an inductive sensor or switching valve via a simple two-wire network to a controlling device such as a PLC or PC.
A unique feature of the AS-I system is the flat, two-core cable (stock no 242-6189) designed to enable fast and easy connection, ensuring correct polarity every time. The cable can be used in a network up to 100m (300m if repeaters are used).
By providing power and data down the same cable, the amount of time normally used to connect sensors and actuators is dramatically reduced, thereby providing savings in cable requirements and man-hours.
The choice of AS-I connection modules enables the user to connect standard sensors/actuators to the BUS with all the address benefits of using dedicated sensors/actuators. It also serves to increase the number of I/O nodes that are available to the user by the use of addressable splitter boxes. The connection modules are available in a variety of packages and can accommodate up to 4 inputs and 4 outputs. This enables up to 124 inputs and 124 outputs to be connected to a single AS-I network.
Another feature of the AS-I system is the method by which the sensors or modules communicate with the host. The design of the communications protocol ensures high data accuracy and error detection capabilities, making the ASI system ideal for automation in noisy and industrial environments.
Benefits of AS-I
Replaces hard wiring
High data speed
Low-cost installation
Intelligent diagnostics
Easy to learn and install
Highly flexible
Can connect to other Fieldbus systems
User-friendly
Off-site pre-assembly and test
Easy maintenance
Faster on-site commissioning
Host or stand-alone use
Able to use standard sensors and actuators (using modules)

Features and Benefits

• Easy to learn and install
• Integrated short circuit protection.
• Intelligent diagnostics
• Integrated overload detection
• Easy maintenance
• Faster onsite commissioning
• Ambient operating temperature ranges between -10°C 70°C

Applications


Industrial automation
• Robotics
• Automobile industry

Certifications


IP20 rated
• UL certified
• CSA certified
• EAC certified

Actuator Sensor Interface (AS-I)

Actuator Sensor Interface, AS-I

AS-I is a method of providing communication from simple discrete components such as an inductive sensor or switching valve via a simple two-wire network to a controlling device such as a PLC or PC.
A unique feature of the AS-I system is the flat, two-core cable (stock no 242-6189) designed to enable fast and easy connection, ensuring correct polarity every time. The cable can be used in a network up to 100m (300m if repeaters are used).
By providing power and data down the same cable, the amount of time normally used to connect sensors and actuators is dramatically reduced, thereby providing savings in cable requirements and man-hours.
The choice of AS-I connection modules enables the user to connect standard sensors/actuators to the BUS with all the address benefits of using dedicated sensors/actuators. It also serves to increase the number of I/O nodes that are available to the user by the use of addressable splitter boxes. The connection modules are available in a variety of packages and can accommodate up to 4 inputs and 4 outputs. This enables up to 124 inputs and 124 outputs to be connected to a single AS-I network.
Another feature of AS-I system is the method by which the sensors or modules communicate with the host. The design of the communications protocol ensures high data accuracy and error detection capabilities, making the ASI system ideal for automation in noisy and industrial environments.

Benefits of AS-I

Replaces hard wiring
High data speed
Low cost installation
Intelligent diagnostics
Easy to learn and install
Highly flexible
Can connect to other fieldbus systems
User-friendly
Off-site pre-assembly and test
Easy maintenance
Faster on-site commissioning
Host or stand alone use
Able to use standard sensors and actuators (using modules)

Specifikationer
Attribute Value
Manufacturer Series 3RX950
For Use With AS-I Power Supply Unit
Line Voltage 120 V ac, 230 V ac
User Power Output Voltage 30V dc
Output Current 5 A
Length 125mm
Width 70mm
Depth 125mm
Dimensions 125 x 70 x 125 mm
4 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
3 690,10 kr
(exkl. moms)
4 612,62 kr
(inkl. moms)
Enheter
Per unit
1 +
3 690,10 kr
Related Products
Quantum power supply modules serve two main functions ...
Description:
Quantum power supply modules serve two main functions - they provide power to the system rack and also protect the system from noise and voltage swings. Power supply modules feature both overcurrent and overvoltage protection. They are able operate in ...
The CJ1M is a powerful and compact PLC ...
Description:
The CJ1M is a powerful and compact PLC family, covering applications requiring up to 640 I/O. CPU models are available with built in pulse outputs for stepper or servo control, and all CPUs in the CJ1M family enjoy optional modules ...
AS-I is a method of providing communication from ...
Description:
AS-I is a method of providing communication from simple discrete components such as an inductive sensor or switching valve via a simple two-wire network to a controlling device such as a PLC or PC.A unique feature of the AS-I system ...
A Lithium battery for protecting program memory against ...
Description:
A Lithium battery for protecting program memory against data loss in the event of a power failure. Suitable for use with SLC-500 processors, hand-held programming terminals and CompactLogix L-20 processors. • Nominal capacity is 850mAh• Operating temperature ranges between -60°C ...