Pepperl + Fuchs PLC I/O Module 2 Inputs, 24 V dc, 99 x 22.5 x 85 mm

  • RS-artikelnummer 623-7797
  • Tillv. 129381
  • Tillverkare / varumärke Pepperl + Fuchs
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): DE

AS-I Analogue Module

2 analogue inputs
Housing with removable terminals
Communication monitoring
Addressing jack
Supply of inputs external or from the module, as required
Function indication for bus, internal
and external sensor power supply, inputs


Actuator Sensor Interface (AS-I)

Actuator Sensor Interface, AS-I

AS-I is a method of providing communication from simple discrete components such as an inductive sensor or switching valve via a simple two-wire network to a controlling device such as a PLC or PC.
A unique feature of the AS-I system is the flat, two-core cable (stock no 242-6189) designed to enable fast and easy connection, ensuring correct polarity every time. The cable can be used in a network up to 100m (300m if repeaters are used).
By providing power and data down the same cable, the amount of time normally used to connect sensors and actuators is dramatically reduced, thereby providing savings in cable requirements and man-hours.
The choice of AS-I connection modules enables the user to connect standard sensors/actuators to the BUS with all the address benefits of using dedicated sensors/actuators. It also serves to increase the number of I/O nodes that are available to the user by the use of addressable splitter boxes. The connection modules are available in a variety of packages and can accommodate up to 4 inputs and 4 outputs. This enables up to 124 inputs and 124 outputs to be connected to a single AS-I network.
Another feature of AS-I system is the method by which the sensors or modules communicate with the host. The design of the communications protocol ensures high data accuracy and error detection capabilities, making the ASI system ideal for automation in noisy and industrial environments.

Benefits of AS-I

Replaces hard wiring
High data speed
Low cost installation
Intelligent diagnostics
Easy to learn and install
Highly flexible
Can connect to other fieldbus systems
Off-site pre-assembly and test
Easy maintenance
Faster on-site commissioning
Host or stand alone use
Able to use standard sensors and actuators (using modules)

Attribute Value
Number of Inputs 2
Input Type Analogue
Number of I/O 2
Voltage Category 24 V dc
Length 99mm
Width 22.5mm
Depth 85mm
Dimensions 99 x 22.5 x 85 mm
Maximum Operating Temperature +70°C
Minimum Operating Temperature 0°C
Tillfälligt slut i lager – restorder för leverans 2019-12-31
Pris (ex. moms) Each
2 943,00 kr
(exkl. moms)
3 678,75 kr
(inkl. moms)
Per unit
1 +
2 943,00 kr
Relaterte Produkter
These modules convert digital PLC values into 2 ...
These modules convert digital PLC values into 2 independent channels of analogue voltage or current outputs. 16 bit resolutionFast conversion rate improves controlBuilt-in EEPROM for storing set-up dataOnly occupies 16 PLC I/O points, great for compact systemsOutput short circuit protection ...
132 with screw/spring terminal digital I/O244 with HE10 ...
132 with screw/spring terminal digital I/O244 with HE10 type connector digital I/O48 analogue I/O (24 input/24 output channels). 3 Communication base modules each with 20 I/O Expandable using 8 to 32 channel I/O modules (up to 264 channels)Wide range of ...
16 point module for applications requiring a fast ...
16 point module for applications requiring a fast response to digital input signals. 10-30Vdc sink inputs Single common for all inputsOff-On signal delay 0.3mS (max.)On-Off signal delay 0.5mS (max.).
Suitable for thermocouple temperature sensors or strain gauges ...
Suitable for thermocouple temperature sensors or strain gauges with millivolt output signals. 4 or 8 inputs individually configurable for thermocouple type, °C, °F, ±50mV, or 100mV rangeSuit J, K, T, E, R, S, B and N type thermocouplesProvides cold junction ...