Pepperl + Fuchs PLC I/O Module 4 Inputs, 21 → 31 V, 118 x 18.7 x 60 mm

  • RS-artikelnummer 623-7747
  • Tillv. art.nr 115086
  • Tillverkare / varumärke Pepperl + Fuchs
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): SG
Produktdetaljer

AS-I Actuator/Sensor Field Modules

Protection degree IP67
A/B slave with addressing possibility for up to 62 slaves
Addressing jack
Flat cable connection with cable piercing technique
Communication monitoring
Inputs for 2-, 3-, and 4-wire sensors
Power supply of outputs from the external auxiliary voltage
Supply for inputs from AS-Interface
Ground connection (FE) possible
Function display for bus, ext. auxiliary voltage, inputs/outputs
Detection of overload on sensor supply
Detection of output overload

Note

Mounting bases not included – See accessories.

//media.rs-online.com/t_line/L316042-01.gif

Actuator Sensor Interface (AS-I)

Actuator Sensor Interface, AS-I

AS-I is a method of providing communication from simple discrete components such as an inductive sensor or switching valve via a simple two-wire network to a controlling device such as a PLC or PC.
A unique feature of the AS-I system is the flat, two-core cable (stock no 242-6189) designed to enable fast and easy connection, ensuring correct polarity every time. The cable can be used in a network up to 100m (300m if repeaters are used).
By providing power and data down the same cable, the amount of time normally used to connect sensors and actuators is dramatically reduced, thereby providing savings in cable requirements and man-hours.
The choice of AS-I connection modules enables the user to connect standard sensors/actuators to the BUS with all the address benefits of using dedicated sensors/actuators. It also serves to increase the number of I/O nodes that are available to the user by the use of addressable splitter boxes. The connection modules are available in a variety of packages and can accommodate up to 4 inputs and 4 outputs. This enables up to 124 inputs and 124 outputs to be connected to a single AS-I network.
Another feature of AS-I system is the method by which the sensors or modules communicate with the host. The design of the communications protocol ensures high data accuracy and error detection capabilities, making the ASI system ideal for automation in noisy and industrial environments.

Benefits of AS-I

Replaces hard wiring
High data speed
Low cost installation
Intelligent diagnostics
Easy to learn and install
Highly flexible
Can connect to other fieldbus systems
User-friendly
Off-site pre-assembly and test
Easy maintenance
Faster on-site commissioning
Host or stand alone use
Able to use standard sensors and actuators (using modules)

Specifikationer
Attribute Value
Number of Inputs 4
Number of I/O 4
Voltage Category 21 → 31 V
Length 118mm
Width 18.7mm
Depth 60mm
Dimensions 118 x 18.7 x 60 mm
Maximum Operating Temperature +60°C
Minimum Operating Temperature -25°C
Tillfälligt slut i lager – restorder för leverans 2019-12-30
Pris (ex. moms) Each
1 325,00 kr
(exkl. moms)
1 656,25 kr
(inkl. moms)
Enheter
Per unit
1 +
1 325,00 kr
Relaterte Produkter
Omron's SmartSlice I/O system is compact, intelligent and ...
Description:
Omron's SmartSlice I/O system is compact, intelligent and easy. When used with Omron's CS1/CJ1 DeviceNet master units it is plug-and-work, no configuration tool is required. By using built-in functions such as pre-scaling, totalising, differentiation and alarming in analog I/O units, ...
SCALANCE client module for Ethernet applicationFor designing Industrial ...
Description:
SCALANCE client module for Ethernet applicationFor designing Industrial Wireless LAN (IWLAN) radio networksReliable communicationEncryption protects against unauthorized accessLED status displaysFor installation in a device or control cabinet.
SCALANCE X-300 managed plusFor setting up electrical and ...
Description:
SCALANCE X-300 managed plusFor setting up electrical and optical industrial Ethernet linear, star or ring structuresRedundant voltage feedDevice diagnosis on device using LEDAlarm contact for simple indication of disruptions.
Freely programmable process controller in four formatsTried-and-tested, clearly ...
Description:
Freely programmable process controller in four formatsTried-and-tested, clearly laid-out operating and configuration diagramBright LCD display for viewing different process parametersMax. two freely programmable analogue inputsUp to 8 binary outputs Four limit comparatorsFreely programmable controller structures ...