Pepperl + Fuchs PLC I/O Module 4 Inputs, 2 Outputs 20 → 30 V dc, 99.6 x 22.5 x 44 mm

  • RS-artikelnummer 623-7703
  • Tillv. 117993
  • Tillverkare / varumärke Pepperl + Fuchs
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): SG

AS-I Actuator/Sensor DIN Rail Modules

22.5mm width housing
Removable terminals
Available with a variety of inputs/outputs


Actuator Sensor Interface (AS-I)

Actuator Sensor Interface, AS-I

AS-I is a method of providing communication from simple discrete components such as an inductive sensor or switching valve via a simple two-wire network to a controlling device such as a PLC or PC.
A unique feature of the AS-I system is the flat, two-core cable (stock no 242-6189) designed to enable fast and easy connection, ensuring correct polarity every time. The cable can be used in a network up to 100m (300m if repeaters are used).
By providing power and data down the same cable, the amount of time normally used to connect sensors and actuators is dramatically reduced, thereby providing savings in cable requirements and man-hours.
The choice of AS-I connection modules enables the user to connect standard sensors/actuators to the BUS with all the address benefits of using dedicated sensors/actuators. It also serves to increase the number of I/O nodes that are available to the user by the use of addressable splitter boxes. The connection modules are available in a variety of packages and can accommodate up to 4 inputs and 4 outputs. This enables up to 124 inputs and 124 outputs to be connected to a single AS-I network.
Another feature of AS-I system is the method by which the sensors or modules communicate with the host. The design of the communications protocol ensures high data accuracy and error detection capabilities, making the ASI system ideal for automation in noisy and industrial environments.

Benefits of AS-I

Replaces hard wiring
High data speed
Low cost installation
Intelligent diagnostics
Easy to learn and install
Highly flexible
Can connect to other fieldbus systems
Off-site pre-assembly and test
Easy maintenance
Faster on-site commissioning
Host or stand alone use
Able to use standard sensors and actuators (using modules)

Attribute Value
Number of Inputs 4
Number of Outputs 2
Number of I/O 6
Voltage Category 20 → 30 V dc
Length 99.6mm
Width 22.5mm
Depth 44mm
Dimensions 99.6 x 22.5 x 44 mm
Minimum Operating Temperature -25°C
Maximum Operating Temperature +70°C
Tillfälligt slut i lager – restorder för leverans 2020-11-13
Pris (ex. moms) Each
1 494,00 kr
(exkl. moms)
1 867,50 kr
(inkl. moms)
Per unit
1 +
1 494,00 kr
Related Products
SCALANCE X-300 managed plusFor setting up electrical and ...
SCALANCE X-300 managed plusFor setting up electrical and optical industrial Ethernet linear, star or ring structuresRedundant voltage feedDevice diagnosis on device using LEDAlarm contact for simple indication of disruptions.
The Mitsubishi digital output module has different switching ...
The Mitsubishi digital output module has different switching elements for adaption to many control tasks.This module has 16 relay output of 8A current rating.Mitsubishi Q Series Digital & Analogue I/O ModulesThe Q series is a modular system if the application ...
The Easy Multi Function Display (MFD) offers the ...
The Easy Multi Function Display (MFD) offers the combination of professional intelligent Relay and HMI operator display. With a much greater functionality than the standard intelligent relay, the Easy MFD will interface with the Easy 800 system allowing systems up ...
The Mitsubishi analogue input module a state-of-the-art device ...
The Mitsubishi analogue input module a state-of-the-art device equipped with 4 output channels suitable for 0-10V and 4-20mA analogue inputs. These analogue adapters provide complete versatility, where each channel can be independently configured for either voltage or current control signals. ...