Siemens Cable for use with Micro Automation Set

  • RS-artikelnummer 746-6056
  • Tillv. 3RX9010-0AA00
  • Tillverkare / varumärke Siemens
Lagstiftning och ursprungsland
COO (Country of Origin): DE

AS-I Cable

A 2 core cabe designed to connect AS-i devices. The yellow cable supplies 30Vdc power to sensors and transfwers data and the black cable can be used for 24Vdc actuators. A trapezoidal cross section is used to prevent polarity reversal.

Actuator Sensor Interface (AS-I)

Actuator Sensor Interface, AS-I

AS-I is a method of providing communication from simple discrete components such as an inductive sensor or switching valve via a simple two-wire network to a controlling device such as a PLC or PC.
A unique feature of the AS-I system is the flat, two-core cable (stock no 242-6189) designed to enable fast and easy connection, ensuring correct polarity every time. The cable can be used in a network up to 100m (300m if repeaters are used).
By providing power and data down the same cable, the amount of time normally used to connect sensors and actuators is dramatically reduced, thereby providing savings in cable requirements and man-hours.
The choice of AS-I connection modules enables the user to connect standard sensors/actuators to the BUS with all the address benefits of using dedicated sensors/actuators. It also serves to increase the number of I/O nodes that are available to the user by the use of addressable splitter boxes. The connection modules are available in a variety of packages and can accommodate up to 4 inputs and 4 outputs. This enables up to 124 inputs and 124 outputs to be connected to a single AS-I network.
Another feature of AS-I system is the method by which the sensors or modules communicate with the host. The design of the communications protocol ensures high data accuracy and error detection capabilities, making the ASI system ideal for automation in noisy and industrial environments.

Benefits of AS-I

Replaces hard wiring
High data speed
Low cost installation
Intelligent diagnostics
Easy to learn and install
Highly flexible
Can connect to other fieldbus systems
Off-site pre-assembly and test
Easy maintenance
Faster on-site commissioning
Host or stand alone use
Able to use standard sensors and actuators (using modules)

Attribute Value
Accessory Type AS-I Line
For Use With Micro Automation Set
Cable Length 100m
Tillfälligt slut i lager – restorder för leverans 2020-07-27
Pris (ex. moms) Each
2 264,46 kr
(exkl. moms)
2 830,58 kr
(inkl. moms)
Per unit
1 - 4
2 264,46 kr
5 - 9
2 151,24 kr
10 +
2 090,23 kr
Related Products
Omron's CP1L series offers the compactness of a ...
Omron's CP1L series offers the compactness of a micro-PLC with the capability of a modular PLC. The range is not only compact, it is scaleable too, and has a faster processing speed than other controllers.
A cable assembly which connects a PC to ...
A cable assembly which connects a PC to a LOGO! Controller to download and upload programs written with LOGO! Soft Comfort. • LOGO! TD device directly connectable to all 0BA6 basic modules.• Display with adjustable permanent backlight (on-board and/or TD).• ...
The Telefast 2 system of pre-cabling is composed ...
The Telefast 2 system of pre-cabling is composed of modules connected to the PLC by means of a multicore cable equipped with HE 10 connectors . The Telefast 2 interfaces make it possible to simplify the operation of wiring and ...
Two PPI programming cables for programme uploading, downloading ...
Two PPI programming cables for programme uploading, downloading and monitoring, at baud rates of 9.6k, 19.2k or 187.5k. Token handling is performed in the cable giving faster and more reliable access to multi-mode networks. RS-232 (serial) version connects directly to ...