Pepperl + Fuchs Interface Module for use with Industrial Sensor AS-Interface

  • RS-artikelnummer 126-3489
  • Tillv. VAZ-T1-FK-G10-1M-PUR-V1-G
  • Tillverkare / varumärke Pepperl + Fuchs
Lagstiftning och ursprungsland
COO (Country of Origin): VN


Actuator Sensor Interface (AS-I)

Actuator Sensor Interface, AS-I

AS-I is a method of providing communication from simple discrete components such as an inductive sensor or switching valve via a simple two-wire network to a controlling device such as a PLC or PC.
A unique feature of the AS-I system is the flat, two-core cable (stock no 242-6189) designed to enable fast and easy connection, ensuring correct polarity every time. The cable can be used in a network up to 100m (300m if repeaters are used).
By providing power and data down the same cable, the amount of time normally used to connect sensors and actuators is dramatically reduced, thereby providing savings in cable requirements and man-hours.
The choice of AS-I connection modules enables the user to connect standard sensors/actuators to the BUS with all the address benefits of using dedicated sensors/actuators. It also serves to increase the number of I/O nodes that are available to the user by the use of addressable splitter boxes. The connection modules are available in a variety of packages and can accommodate up to 4 inputs and 4 outputs. This enables up to 124 inputs and 124 outputs to be connected to a single AS-I network.
Another feature of AS-I system is the method by which the sensors or modules communicate with the host. The design of the communications protocol ensures high data accuracy and error detection capabilities, making the ASI system ideal for automation in noisy and industrial environments.

Benefits of AS-I

Replaces hard wiring
High data speed
Low cost installation
Intelligent diagnostics
Easy to learn and install
Highly flexible
Can connect to other fieldbus systems
Off-site pre-assembly and test
Easy maintenance
Faster on-site commissioning
Host or stand alone use
Able to use standard sensors and actuators (using modules)

Attribute Value
Accessory Type AS-Interface Splitter Box
For Use With Industrial Sensor AS-Interface
Series VAZ
Cable Length 2m
Application Industrial
Termination Plug-In
Tillfälligt slut i lager – restorder för leverans 2020-01-07
Pris (ex. moms) Each
171,00 kr
(exkl. moms)
213,75 kr
(inkl. moms)
Per unit
1 +
171,00 kr
Relaterte Produkter
The Pmod ESP32 provides an easy and cost ...
The Pmod ESP32 provides an easy and cost effective way to add wireless communication to any host platform or project. It uses the fully certified ESP-WROOM-32 Wi-Fi + BLE + BT module from Espress if Systems. It is suitable for ...
Supports four RS-232 serial portsConnect with the Serial ...
Supports four RS-232 serial portsConnect with the Serial Device directly - Adding network function simply and quickly - Providing Firmware customizationHigh system stability and reliablilty by using W5300Easy and powerful configuration tool programSupport DHCP and DNS functionSupport static as well ...
Network virtually any device in minutesAccess, monitor and ...
Network virtually any device in minutesAccess, monitor and control equipment over EthernetReplace dedicated PCs and/or modem lines with fast and reliable Ethernet networkingConfigure quickly and easily via HTTP, DHCP, Telnet, serial or Lantronix DeviceInstaller™ utilitySupports RS-232, RS-422 and RS-485 ...
Built on leading Digi 32-bit ARM® technology, the ...
Built on leading Digi 32-bit ARM® technology, the Digi Connect ME® is a connector-style embedded module that enables manufacturers to keep pace with ever-evolving networking technology by easily adding secure web-enabled network connectivity to their products. Highly-integrated 32-bit NS7520 ARM7TDMI ...