Pepperl + Fuchs Interface Module for use with Industrial Sensor AS-Interface

  • RS-artikelnummer 126-3486
  • Tillv. art.nr VAZ-2T1-FK-G10-2M-PUR-V1-G
  • Tillverkare / varumärke Pepperl + Fuchs
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): VN
Produktdetaljer

Accessories

Actuator Sensor Interface (AS-I)

Actuator Sensor Interface, AS-I

AS-I is a method of providing communication from simple discrete components such as an inductive sensor or switching valve via a simple two-wire network to a controlling device such as a PLC or PC.
A unique feature of the AS-I system is the flat, two-core cable (stock no 242-6189) designed to enable fast and easy connection, ensuring correct polarity every time. The cable can be used in a network up to 100m (300m if repeaters are used).
By providing power and data down the same cable, the amount of time normally used to connect sensors and actuators is dramatically reduced, thereby providing savings in cable requirements and man-hours.
The choice of AS-I connection modules enables the user to connect standard sensors/actuators to the BUS with all the address benefits of using dedicated sensors/actuators. It also serves to increase the number of I/O nodes that are available to the user by the use of addressable splitter boxes. The connection modules are available in a variety of packages and can accommodate up to 4 inputs and 4 outputs. This enables up to 124 inputs and 124 outputs to be connected to a single AS-I network.
Another feature of AS-I system is the method by which the sensors or modules communicate with the host. The design of the communications protocol ensures high data accuracy and error detection capabilities, making the ASI system ideal for automation in noisy and industrial environments.

Benefits of AS-I

Replaces hard wiring
High data speed
Low cost installation
Intelligent diagnostics
Easy to learn and install
Highly flexible
Can connect to other fieldbus systems
User-friendly
Off-site pre-assembly and test
Easy maintenance
Faster on-site commissioning
Host or stand alone use
Able to use standard sensors and actuators (using modules)

Specifikationer
Attribute Value
Accessory Type AS-Interface Splitter Box
For Use With Industrial Sensor AS-Interface
Cable Length 2m
Series VAZ
Termination Plug-In
Application Industrial
6 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
285,00 kr
(exkl. moms)
356,25 kr
(inkl. moms)
Enheter
Per unit
1 +
285,00 kr
Relaterte Produkter
Supports four RS-232 serial portsConnect with the Serial ...
Description:
Supports four RS-232 serial portsConnect with the Serial Device directly - Adding network function simply and quickly - Providing Firmware customizationHigh system stability and reliablilty by using W5300Easy and powerful configuration tool programSupport DHCP and DNS functionSupport static as well ...
The Semikron SKYPER Prime driver module provides the ...
Description:
The Semikron SKYPER Prime driver module provides the interface between a controller and suitable Primepack or Semitrans 10 IGBT modules. The dual channel SKYPER Prime module can drive IGBTs with ratings of up to 1400 A and 1700V. • Dual ...
Six communication modules for use with FX3U PLCs. ...
Description:
Six communication modules for use with FX3U PLCs. The ADP modules fit on to the left hand side of the base unit while the BD modules clip into the front left corner of the base unit. The RS232 interfaces can ...
Three memory cassettes that can be installed into ...
Description:
Three memory cassettes that can be installed into the FX3U CPU, and when installed the memory cassette's internal program is used in place of the internal RAM memory. The FX3U-FLROM-64L (stock no. 539-0853) features program transfer buttons to allow permanent ...