Pepperl + Fuchs Interface Module for use with Industrial Sensor AS-Interface

  • RS-artikelnummer 126-3485
  • Tillv. art.nr VAZ-T1-FK-G10-2M-PUR-V1-W
  • Tillverkare / varumärke Pepperl + Fuchs
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): VN
Produktdetaljer

Accessories

Actuator Sensor Interface (AS-I)

Actuator Sensor Interface, AS-I

AS-I is a method of providing communication from simple discrete components such as an inductive sensor or switching valve via a simple two-wire network to a controlling device such as a PLC or PC.
A unique feature of the AS-I system is the flat, two-core cable (stock no 242-6189) designed to enable fast and easy connection, ensuring correct polarity every time. The cable can be used in a network up to 100m (300m if repeaters are used).
By providing power and data down the same cable, the amount of time normally used to connect sensors and actuators is dramatically reduced, thereby providing savings in cable requirements and man-hours.
The choice of AS-I connection modules enables the user to connect standard sensors/actuators to the BUS with all the address benefits of using dedicated sensors/actuators. It also serves to increase the number of I/O nodes that are available to the user by the use of addressable splitter boxes. The connection modules are available in a variety of packages and can accommodate up to 4 inputs and 4 outputs. This enables up to 124 inputs and 124 outputs to be connected to a single AS-I network.
Another feature of AS-I system is the method by which the sensors or modules communicate with the host. The design of the communications protocol ensures high data accuracy and error detection capabilities, making the ASI system ideal for automation in noisy and industrial environments.

Benefits of AS-I

Replaces hard wiring
High data speed
Low cost installation
Intelligent diagnostics
Easy to learn and install
Highly flexible
Can connect to other fieldbus systems
User-friendly
Off-site pre-assembly and test
Easy maintenance
Faster on-site commissioning
Host or stand alone use
Able to use standard sensors and actuators (using modules)

Specifikationer
Attribute Value
Accessory Type AS-Interface Splitter Box
For Use With Industrial Sensor AS-Interface
Application Industrial
Series VAZ
Termination Plug-In
Tillfälligt slut i lager – restorder för leverans 2019-12-02
Pris (ex. moms) Each
179,00 kr
(exkl. moms)
223,75 kr
(inkl. moms)
Enheter
Per unit
1 +
179,00 kr
Relaterte Produkter
The tiny STG-570 CAN is a highly integrated ...
Description:
The tiny STG-570 CAN is a highly integrated programmable logic controller providing outstanding graphical programming capability at lowest current consumption and small form factor.The CAN bus allows the user to connect a variety of network components to the Mini-PLC, for ...
The STG-680 MOD is highly innovative Mini-PLC that ...
Description:
The STG-680 MOD is highly innovative Mini-PLC that extends the established Barth series of Mini-PLC’s. It features a rugged MODBUS interface with graphical programming at lowest current consumption and configuration capabilities. The MODBUS interface allows you to connect various industrial ...
Connectors and pre-assembled cables for connection of OTB, ...
Description:
Connectors and pre-assembled cables for connection of OTB, FTB, Altivar31 and Lexium 05 via Modbus or CANopen. A network interface module (including CANopen) with 12 inputs x 24V, 6 relay outputs and 2 solid state outputs x 24V-0.3 AAs an ...
This compact device allows a Computer with a ...
Description:
This compact device allows a Computer with a USB port to interface to DH-485 ports on SLC-500 processors for programming purposes. The 1747-UIC features a USB port and is switch selectable between a RJ-45 RS-485 port or a 9 pin ...