- RS-artikelnummer:
- 763-7898
- Tillv. art.nr:
- VL180-2P42431
- Tillverkare / varumärke:
- Sick
Tillfälligt slut i lager – restorder för leverans 2024-04-24
Lagt till varukorgen
Pris (ex. moms) Varje
962,50 kr
(exkl. moms)
1 203,12 kr
(inkl. moms)
Enheter | Per unit |
1 + | 962,50 kr |
Alternativ
Denna produkt är för närvarande inte tillgänglig. Vi rekommenderar denna produkt istället.
- RS-artikelnummer:
- 763-7898
- Tillv. art.nr:
- VL180-2P42431
- Tillverkare / varumärke:
- Sick
Datablad
Lagstiftning och ursprungsland
- COO (Country of Origin):
- CN
Produktdetaljer
Sick Photoelectric Retroreflective Sensor - VL180 Series
Introducing Sick's VL180 photoelectric retroreflective sensor within a cylindrical M18 housing. The VL180 proximity sensor has a polarizing filter for reliable detection of highly reflective objects. Sick's photoelectric sensors are cost-effective, providing a sensing solution for lower installation costs. The smooth and flat front screen reduces the accumulation of dirt and dust, ultimately reducing the amount of maintenance and ensures reliable operation.
Features & Benefits
Bright power and signal LEDs with 360° visibility
Red sender LED simplifies alignment and saves installation time
Flat, smooth lens reduces the collection of dust and dirt ensuring safe operation
High switching frequency
Housing length 70.2 mm
Cylindrical housing design
Features a supply voltage of 10V DC - 30V DC
The enclosure has an IP rating of IP67, this means that the enclosure is protected against dust and is completely dust-tight. This rating also means that the enclosure has moisture protection against full immersion for up to 30 minutes at depths between 15cm and 1m
The sensor has light and dark switching modes
The connection type is a male connector M12, 4-pin
Switching mode selectable via L/D control cable
Red sender LED simplifies alignment and saves installation time
Flat, smooth lens reduces the collection of dust and dirt ensuring safe operation
High switching frequency
Housing length 70.2 mm
Cylindrical housing design
Features a supply voltage of 10V DC - 30V DC
The enclosure has an IP rating of IP67, this means that the enclosure is protected against dust and is completely dust-tight. This rating also means that the enclosure has moisture protection against full immersion for up to 30 minutes at depths between 15cm and 1m
The sensor has light and dark switching modes
The connection type is a male connector M12, 4-pin
Switching mode selectable via L/D control cable
Supplied with
2 fastening nuts
Reflector
Reflector
Specifikationer
Attribute | Value |
---|---|
Sensor Style | Barrel |
Detection Type | Retroreflective |
Detection Range | 50 mm → 7 m |
Output Type | PNP |
Electrical Connection | M12 4 Pin Connector |
Maximum DC Voltage | 30V |
Light Source | LED |
IP Rating | IP67 |
Maximum Current | 100 mA |
Response Time | <500 μs |
Mounting Type | Threaded |
Series | V180-2 |
Minimum Operating Temperature | -25°C |
Maximum Operating Temperature | +55°C |
Housing Material | Nickel Plated Brass, PC |