- RS-artikelnummer:
- 374-2044
- Tillv. art.nr:
- E3ZR86
- Tillverkare / varumärke:
- Omron
- RS-artikelnummer:
- 374-2044
- Tillv. art.nr:
- E3ZR86
- Tillverkare / varumärke:
- Omron
Lagstiftning och ursprungsland
RoHS-status: Inte relevant
Produktdetaljer
E3Z Miniature High Performance Sensors
Through-beam (Infrared LED), Retro-reflective (Visible red LED) and Diffuse scan (Infrared LED) photoelectric sensors
IP67 rated PBT housing with methacylate lens
PNP and NPN output configurations
Light ON/dark ON selectable
Small dead-band for sensing close targets
Retro-reflective versions have polarised light source for shiny object detection
Short circuit and reverse polarity protection
Mutual interference protection (retro and diffuse versions only)
Operating temperature range -25° → +55°C
PNP and NPN output configurations
Light ON/dark ON selectable
Small dead-band for sensing close targets
Retro-reflective versions have polarised light source for shiny object detection
Short circuit and reverse polarity protection
Mutual interference protection (retro and diffuse versions only)
Operating temperature range -25° → +55°C
Note
For suitable reflector see stock no. 171-3779 (3m range)
OMRON Photoelectric Sensor, 1ms Response Time, PBT Housing - E3ZR Series - E3ZR86
Need to automate the detection of the objects in your setup? Use this photoelectric sensor from OMRON. It's a retroreflective device that sends a beam to a reflector. If the beam is broken and doesn't bounce back, the sensor then uses its relay output function to alert the controller. It's safe to use this unit in harsh settings, as its PBT housing shrugs off impact and abrasion. This material is also an insulator that protects you from electric shocks. Thanks to built-in LED indicators, it's easy to monitor the device's status and diagnose faults at a glance.
Features & Benefits
M8 threaded connector makes it easy to install, saving time and hassle
Compact dimensions of 31 (H) x 10.8 (W) x 20mm (D) for space-efficient installation in busy setups
MSR (mirror surface rejection) function minimises false triggering by using a polarising filter
Detection range between 100mm and 4m for versatility
IP69K rating indicates it's dustproof and withstands high-temperature water jets
Compact dimensions of 31 (H) x 10.8 (W) x 20mm (D) for space-efficient installation in busy setups
MSR (mirror surface rejection) function minimises false triggering by using a polarising filter
Detection range between 100mm and 4m for versatility
IP69K rating indicates it's dustproof and withstands high-temperature water jets
Applications
Robotics systems
Packaging equipment
Factory safety devices
Packaging equipment
Factory safety devices
How do I configure this photoelectric sensor?
For simplicity, you can fine-tune this product manually using the two buttons on its top surface.
Specifikationer
Attribute | Value |
---|---|
Sensor Style | Block |
Detection Type | Retroreflective |
Detection Range | 100 mm → 4 m |
Output Type | PNP |
Electrical Connection | M8 4 Pin Connector |
Switching Mode | Light / Dark switching |
Maximum DC Voltage | 26.4V |
Light Source | LED |
IP Rating | IP67 |
Maximum Current | 100 mA |
Response Time | 1 ms |
Mounting Type | Flange Mount |
Series | E3ZR |
Maximum Operating Temperature | +55°C |
Housing Material | PBT |
Minimum Operating Temperature | -25°C |
Standards Met | CE |