TE Connectivity AMP Series PCB Guide Pin for use with 20 Position High Voltage Connectors

  • RS-artikelnummer 718-6732
  • Tillv. art.nr 1-200833-1
  • Tillverkare / varumärke TE Connectivity
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

TE Connectivity M Series Guide Pins and Sockets

M Series guide pins and sockets made from stainless steel. These guide pins and sockets are used for aligning connector halves during mating. Centre guide pins and sockets are used in housings that have a single mounting hole as well as in the centre hole of housings that have 3 or 4 mounting holes. Corner guide pins and sockets are for use in corner holes of housings that have 2 to 4 mounting holes but cannot be used in centre mounting holes.

TE Connectivity M Series Connector

Standard connectors are furnished as unloaded housings that have Multimate contact cavities for accepting Type II, Type
III+, and subminiature COAXICON crimp-type contacts, as well as Type III+ solder-type and posted contacts. All Multimate contacts are interchangeable in the same housing cavity.

Specifikationer
Attribute Value
Backplane Connector Accessory Type Guide Pin
Accessory Type Guide Pin
For Use With 20 Position High Voltage Connectors
Series AMP
17 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
53,04 kr
(exkl. moms)
66,30 kr
(inkl. moms)
Enheter
Per unit
1 - 24
53,04 kr
25 - 74
46,74 kr
75 - 199
44,46 kr
200 - 399
37,02 kr
400 +
35,16 kr
Förpackningsalternativ:
Related Products
Z-PACK™ HM 2mm Type C backplane right angle ...
Description:
Z-PACK™ HM 2mm Type C backplane right angle and vertical mounting header and receptacle connectors for a 2mm HM interface available as free or fixed board PCB mounting with ground return shielding options, ACTION PIN post contact and CompactPCI options ...
Fibre Optic MT VITA 66 fibre optic backplane ...
Description:
Fibre Optic MT VITA 66 fibre optic backplane receptacle kit (stock number 905-3343) and mating Fibre Optic MT VITA 66 fibre optic modular plug kit (stock number 905-3347) for providing a high-density, blind-mate optical interconnect in a backplane/card configuration. The ...
These AMP-HDI connectors are hybrid versions and provide ...
Description:
These AMP-HDI connectors are hybrid versions and provide a blend of signal with power or coax. The signal contacts are based on the standard .100 x .100" [2.54 x 2.54mm] grid and feature ports that accept either power or coax ...
This transfer connector system makes it possible to ...
Description:
This transfer connector system makes it possible to create plug in transitions on the wiring plane from the internal wiring to the external wiring. This is possible in the wiring pad or on the upper or lower edge area. As ...