TE Connectivity M Series Series, Guide Socket Kit

  • RS-artikelnummer 709-9883
  • Tillv. art.nr 201047-2
  • Tillverkare / varumärke TE Connectivity
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

TE Connectivity M Series Guide Pins and Sockets

M Series guide pins and sockets made from stainless steel. These guide pins and sockets are used for aligning connector halves during mating. Centre guide pins and sockets are used in housings that have a single mounting hole as well as in the centre hole of housings that have 3 or 4 mounting holes. Corner guide pins and sockets are for use in corner holes of housings that have 2 to 4 mounting holes but cannot be used in centre mounting holes.

TE Connectivity M Series Connector

Standard connectors are furnished as unloaded housings that have Multimate contact cavities for accepting Type II, Type
III+, and subminiature COAXICON crimp-type contacts, as well as Type III+ solder-type and posted contacts. All Multimate contacts are interchangeable in the same housing cavity.

Specifikationer
Attribute Value
Accessory Type Guide Socket Kit
For Use With 12 Position High Current Connectors, 28 Position High Voltage Connectors, 29 Position Mixed Connectors, 75 Cf Position Posted Connectors, 75 Cf Position Standard Connectors, 104 Cf Position Posted Connectors, 104 Cf Position Standard Connectors, 160 Cf Position Posted Connectors, 160 Cf Position Standard Connectors
Series M Series
136 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
70,93 kr
(exkl. moms)
88,66 kr
(inkl. moms)
Enheter
Per unit
1 +
70,93 kr
Förpackningsalternativ:
Related Products
Eurocard pin and socket crimp snap-in contacts for ...
Description:
Eurocard pin and socket crimp snap-in contacts for use with a variety of vertical Eurocard housings (see table for details). These Eurocard pin and socket crimp snap-in contacts are gold plated and are available as DIN I or DIN II ...
Ultra low profile Interface connectors with 2.0 mm ...
Description:
Ultra low profile Interface connectors with 2.0 mm mounting height. Shell stainless steel Low profile on the PCBStrong constructionHigh contact reliabilitySequenced contact matingIncorrect Insertion PreventionSafety plug release.
The ITT Cannon DL series metal backshell for ...
Description:
The ITT Cannon DL series metal backshell for 156-way ZIP connector. It consists of 2 shells, 10 screws, 1 wire hood, 1 wire clamp and 1 lock/open indication seal. This has nickel over die-cast aluminium shell and stainless steel hardware. ...
Ultra low profile Interface connectors with 2.0 mm ...
Description:
Ultra low profile Interface connectors with 2.0 mm mounting height. Shell stainless steel Low profile on the PCBStrong constructionHigh contact reliabilitySequenced contact matingIncorrect Insertion PreventionSafety plug release.