TE Connectivity Amplimite .050 III Series, 100 Way Through Hole PCB D-sub Connector Socket, 2.54mm Pitch

  • RS-artikelnummer 680-7712
  • Tillv. art.nr 5749069-9
  • Tillverkare / varumärke TE Connectivity
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

AMPLIMITE .050 Series III D-Sub Shielded Receptacle Header Connectors

AMPLIMITE .050 Series III PCB d-sub receptacle headers with a compact space saving design and high density D type interface with 1.27 x 2.54 mm contact spacing. These AMPLIMITE .050 Series III PCB mount d-sub connectors have full shielding which offers excellent EMI/RFI protection. The housings are made from high temperature thermoplastic which are compatible with reflow solder processes. The right angle PCB d-sub headers are available with integral board locks that enable a secure connection to the PCB and provide grounding. These AMPLIMITE .050 PCB D-sub headers are also available with rails and latch blocks which lock the header to the corresponding mating cable connector. The rails also offer extra contact protection by preventing a side to side rocking movement during unmating.

Features and Benefits

• Compact, space saving design
• Full shielding for EMI/RFI protection
• Compatible with surface mount reflow solder process
• Integral board locks secure PCB connection and grounding
• Rails and latch blocks for secure mating connection

Applications

These AMPLIMITE .050 Series III PCB d-sub connectors are suitable for use in applications where high density and space saving are key requirements. Applications include consumer electronics, telecommunications, Local Area Networks, military, industrial and medical equipment

Standards

Shielded AMPLIMITE .050 Series Connectors, Series III, are approved to SCSI-2, SCSI-3, EIA RS-232, ISO-11569*, IPI-2, HIPPI, and IEE 802.3 MII standards.

TE Connectivity AMPLIMITE D-Subminiature Connectors

Specifikationer
Attribute Value
Number of Contacts 100
Gender Female
Body Orientation Straight
Mounting Type Through Hole
Pitch 2.54mm
Mounting Hardware Rails and Latchblocks
Housing Material Thermoplastic
Length 84.2mm
Width 8.92mm
Depth 10.31mm
Dimensions 84.2 x 8.92 x 10.31mm
Minimum Operating Temperature -55°C
Contact Material Phosphor Bronze
Series Amplimite .050 III
Maximum Operating Temperature +105°C
Contact Plating Gold over Palladium Nickel
30 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
169,68 kr
(exkl. moms)
212,10 kr
(inkl. moms)
Enheter
Per unit
1 - 9
169,68 kr
10 - 24
144,24 kr
25 - 49
127,29 kr
50 +
110,33 kr
Förpackningsalternativ:
Related Products
AMPSEAL 16 pin cap housings with integral primary ...
Description:
AMPSEAL 16 pin cap housings with integral primary latch reinforcement. These AMPSEAL 16 pin cap housings housings have colour coding and physical keying to prevent mismating. Pin cap housings consist of a cap housing with wire seal, wire seal cover ...
Eurocard plug and receptacle connectors which meet DIN ...
Description:
Eurocard plug and receptacle connectors which meet DIN 41612 and IEC 60603-2 with an internationally accepted quality design for high Signal Integrity and electrical performance. These Eurocard DIN 41612 connectors are available in a range of types B, C, D, ...
Developed to meet current needs within the industry ...
Description:
Developed to meet current needs within the industry (industrial electronics, IT, medical equipment, private communication etc.).Connectors with a pitch of 2.54 mm between rows and UNC 4-40 threaded insert.
Designed for use in electronic systems in commercial ...
Description:
Designed for use in electronic systems in commercial and military aerospace, military land and sea and industrial/telecommunication applications, the Micro D connector provides exceptional mechanical and electrical integrity, whilst operating in extreme vibration and environmental conditions. 0.100 inch x 0.100 ...