Testec TT-SI 9002 Oscilloscope Probe, Probe Type: Active, Differential 25MHz 1kV

  • RS-artikelnummer 224-1225
  • Tillv. art.nr SI-9002
  • Tillverkare / varumärke Testec
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): TW
Produktdetaljer

Differential probes SI-9001, SI-9002

When you use the oscilloscope in its usual context to show and measure circuit shaft formations, you are working in the most common mode for voltage measurements. The differential probe enhances the oscilloscope probe's measuring capabilities with performance conversion, inverters, motor speed indicators, switch mode power supplies and many other applications.

Testec

The Testec is an active differential oscilloscope probe that enables a conventional oscilloscope to display and measure in-circuit waveforms that are referenced to high common-mode voltages. It is capable of safely measuring differential voltages up to ±1000VAC and 1400VAC/DC. It supports bandwidths up to 25MHz.

Features and Benefits

• Bandwidth is DC to 25MHz
• Attenuation is 1:20/1:200
• Rise time is 14ns
• Differential mode input voltage is 1:20 ±140V (DC+peak AC) or 140Vrms 1:200 ±1400V (DC+peak AC) or 1000Vrms
• Input impedance is 4Mohm ll5.5pF each side to ground
• Common mode voltage range is 1:20 and 1:200 ±1400V (DC+peak AC) or 1000Vrms
• Non-destructive Max input voltage is 1:20 and 1:200 ±1400V (DC+peak AC) or 1000Vrms
• CMRR (typical) is -80dB at 50Hz and -60dB at 20kHz
• Offset (typical) is <±5mV
• Noise (typical) is 0.7mVRMS

Applications

• Performance conversion
• Inverters
• Motor speed indicators
• Switch mode power supplies

Specifikationer
Attribute Value
Probe Type Active, Differential
Attenuation 1:20, 1:200
Bandwidth 25MHz
Maximum Common Mode Input Voltage 1kV
Model Number p TT-SI 9002
Safety Category Level CAT III
Safety Category Voltage 1000 V ac, 1400 V ac/dc
Series SI
Safety Category CAT III 1000 V ac, CAT III 1400 V
Rise Time 14ns
I lager för leverans inom 2 arbetsdagar
Pris (ex. moms) Each
2 897,55 kr
(exkl. moms)
3 621,94 kr
(inkl. moms)
Enheter
Per unit
1 +
2 897,55 kr
Nästa dag-leverans inte möjlig
Related Products
Safety system clamp-type test probe with two-part test ...
Description:
Safety system clamp-type test probe with two-part test clampThe sprung stainless steel tip can contact insulated cables from 0.25 → 1.5 mm2 (Ø 3.5 mm) without the need for strippingSocket connector made from brassVoltage rating: AC/DC 1000 VCurrent rating: 10 ...
MDO3000 oscilloscopes are designed to meet users' needs ...
Description:
MDO3000 oscilloscopes are designed to meet users' needs and aspirations now and into the future. Each model is multi-functional with integrated basic spectrum analyzer, Wave Inspector Navigation, MSO, serial and parallel bus triggering and analysis, and digital voltmeter. Optional instrument ...
The Teledyne LeCroy RP4030 Power Rail Probe meets ...
Description:
The Teledyne LeCroy RP4030 Power Rail Probe meets the specific requirements of those who need to acquire a low-voltage DC signal as part of a: Comprehensive power integrity, digital power management IC (PMIC), voltage regulator module (VMR), point-of-load (POL) switching ...
The Metrix DOX3000 Series offers innovative sensitive phosphor ...
Description:
The Metrix DOX3000 Series offers innovative sensitive phosphor oscilloscope (SPO) technology, digital trigger, decoding of serial bus, logic input MSO and integral logic analyser. The choice of model is between the 100MHz, 4-channel DOX3104 ( 879-3848 ) and the 300MHz, ...