ABB 3 Pole Non Fused Isolator Switch - 23 A Maximum Current, 7.5 kW Power Rating, IP65

  • RS-artikelnummer 500-1020
  • Tillv. art.nr 1SCA022399R6750 - OTP16A3M
  • Tillverkare / varumärke ABB
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
Produktdetaljer

OTP Series industrial safety switches

3-pin safety switch
Sealed construction, IP65
Cable feed through from above and below
With auxiliary contact

Kraus & Naimer

All have a nominal voltage of 690V. The stated motor rating utilisation category AC23A/AC3 is for 3 phase 380/440V supply.

Specifikationer
Attribute Value
Number of Poles 3
Maximum Current 23 A
Normal State Configuration 2NO/2NC
Power Rating 7.5 kW
IP Rating IP65
Voltage Rating 690 V ac
Auxiliary Contacts Available Yes
Electrical Phase 3
Switch Rating 6.5 A
Length 150mm
Width 130mm
Depth 60mm
Handle Colour Red
Terminal Type Screw
6 I lager för leverans inom 1 arbetsdagar
Inom 2 arbetsdag(ar) (UK lager)
Pris (ex. moms) Each
753,79 kr
(exkl. moms)
942,24 kr
(inkl. moms)
Enheter
Per unit
1 - 4
753,79 kr
5 - 11
730,71 kr
12 +
707,16 kr
Related Products
The switch fuses from the ABB OS series ...
Description:
The switch fuses from the ABB OS series are available in 3 or 4 pole. These fused switches are easy to use and snap to install, the adjustable mounting feet allow both top and side mounting of the switch fuse. ...
All have a nominal voltage of 690V. The ...
Description:
All have a nominal voltage of 690V. The stated motor rating utilisation category AC23A/AC3 is for 3 phase 380/440V supply. Fingerproof terminalsPadlockable in "OFF" position22.5mm single hole mounting.Faceplate engraved 0-1.
The ABB OTDC series switch-disconnectors are expertly designed ...
Description:
The ABB OTDC series switch-disconnectors are expertly designed for PV applications and are most commonly used to isolate single strings or arrays of solar panels and battery banks. The switch disconnectors can also act as the main switch for the ...
Common auxiliary blocks can be fitted without the ...
Description:
Common auxiliary blocks can be fitted without the use of tools as can the fourth pole. Auxiliary contacts are rated at 17Vdc, 5mA (DIN 19240). 4th pole is early make, late break. Fully rated neutral Insulation voltage Ui 690V. Thermal ...