3 Pole Panel Mount Non Fused Isolator Switch, NO, 20 A, 6.5 kW, IP65

  • RS-artikelnummer 219-1401
  • Tillv. art.nr T0-2-1/EA/SVB
  • Tillverkare / varumärke Eaton
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): GB
Produktdetaljer

Eaton Panel Mount Isolator Switch

Eaton's panel mount isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.

Features & Benefits

• The perfect solution for installing as a safety measure
• Used as an emergency switching off/emergency stop device
• The basic functions are when used as a main switch, maintenance switch or manual override switch
• Thermoplastic, high impact surface mounting enclosure with an IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions
• Lockable in the 0/OFF position, with up to three padlocks
• Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish
• Common accessories: 262-3784, 219-1445, 219-1439

What is the difference between a fused switch disconnector and a non-fused switch disconnector?

Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.

Specifikationer
Attribute Value
Number of Poles 3
Maximum Current 20 A
Mounting Type Panel Mount
Normal State Configuration NO
Power Rating 6.5 kW
IP Rating IP65
Accepts Padlocks Yes
Voltage Rating 440 V ac
Auxiliary Contacts Available Yes
Electrical Phase 3
Switch Rating 320 A
Length 90mm
Width 75mm
Depth 50mm
Minimum Operating Temperature -25°C
Maximum Operating Temperature +50°C
Terminal Type Screw
Throw Configuration Single
Handle Colour Red
60 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
226,77 kr
(exkl. moms)
283,46 kr
(inkl. moms)
Enheter
Per unit
1 - 4
226,77 kr
5 - 14
217,49 kr
15 +
210,29 kr
Related Products
All CBEs have blade terminals and have an ...
Description:
All CBEs have blade terminals and have an insulation resistance greater than 100MΩ (MegaOhms). 2-pole magnetic hydraulic CBE with trip free snap action mechanism with toggle actuation.Industry standard dimensions with medium delay for most applications.Typically used on control equipment, communication ...
Santon C-Type enclosed maintenance free switch disconnectors offer ...
Description:
Santon C-Type enclosed maintenance free switch disconnectors offer a high-power rating in a glass fibre filled Noryl enclosure. The enclosure offers high resistance to chemically aggressive substances, dirt, dust and salt. High-power rating 2 auxiliary contacts IP69 rated 10° sloping ...
Craig & Derricott i-switch range of slopped roof ...
Description:
Craig & Derricott i-switch range of slopped roof stainless steel switch disconnectors specially suited for hygienic environments. The design has been created to minimise areas where dirt can accumulate and incorporates a flush rear surface and universal fixing that include ...
These switches fully conform to IEC204, VDE 0660 ...
Description:
These switches fully conform to IEC204, VDE 0660 and IEC947 and are UL,CSA approved. A full range of accessories is available. Manufactured from thermo-resistant and self-extinguishing materials (UL94-VØ) which are free from Cadmium, Halogen and Asbestos.