RS Components
Vår webbplats använder cookies och liknande teknik för att ge bättre service vid sökning och vid beställning, för analytiska ändamål och för att kunna anpassa vår marknadsföring till dig.
 
Sök efter P/N

SPF-RFID-M Magnetic, RFID Safety Switch, Plastic, 24 V dc


4 I lager för leverans inom 1 arbetsdagar
Add to Basket

Pris (ex. moms) Each

967,79 kr

(exkl. moms)

1 209,74 kr

(inkl. moms)

Enheter

Lagt till varukorgen

RS-artikelnummer:
826-4338
Tillv. art.nr:
405101
Tillverkare / varumärke:
IDEM
COO (Country of Origin):
GB
EnheterPer unit
1 +967,79 kr

IDEM Non Contact RFID Safety Switches


The LPF-RFID and SPF-RFID from IDEM are non-contact safety switches that have been developed to provide and maintain a high level of functional safety whilst providing a very high anti-tamper coded activation. The coding is achieved using magnetic and RFID techniques, both principles need to be satisfied for the switch to operate safely. The RFID sensing provides a tamper resistant operation when the actuator is in the sensing range of the switch.
These non-contact safety switches have plastic housings and offer IP69K ingress protection. They can be used in almost any environment including areas where high pressure cleaning is required and are suitable for CIP and SIP processes.
Available in two types, either coded by series or uniquely coded, these RFID safety switches have a typical sensing distance of 14mm (on), and a wide tolerance to guard misalignment after setting.
The LPF-RFID and SPF-RFID series will connect to most popular standard Safety Relays to achieve up to PLe/Category 4 to ISO13849-1.


Master Code - by series (any actuator will operate any switch) - used when unique door activation is not required, but the benefit of RFID makes it virtually impossible to be overridden or by-passed by simple means.
Unique Code - 32,000,000 unique codes. These switches are factory set and used when unique activation is required in areas where there are many interlocked doors and security of individual areas is required.


RFID coded actuation to provide high tamper proof interlock security on guard doors
Unique RFID or series coding RFID available - dependent upon user risk assessment
Connects to most safety relays to maintain PLe/Cat4
Connect up to 20 switches in series
Ability to connect other switches and E-Stops in series
High functional safety to ISO13849-1
Diagnostic green LED - indication of safety circuits closed
2NC safety outputs short circuit protected
1NO auxiliary output for indication of door open
No moving parts - high switch life, resistance to shock and vibration
Quick connect (QC-M12) and cable versions available
Spare master coded actuators available: 826-4362 is for LPF models and 826-4366 is for SPF models


LPF-RFID Safety Switch


Uniquely coded: 826-4331 & 826-4334
Master coded: 826-4328 & 826-4322
78mm fixing centres
Housing: 25 x 88 x 13mm


SPF-RFID Safety Switch


Uniquely coded: 826-4340 & 826-4344
Master coded: 826-4338 & 826-4347
22mm fixing centres
Housing: 25.5 x 50 x 13mm


Note

The normally closed (NC) circuits are closed when the guard is closed and the actuator is present.

Standards

EN 1088, EN 60947-5-3, EN 60204-1, ISO 13849-1, EN 62061, EN 954-1, UL 508.

Approvals

CE, cULus, TUV.

Supplied with

Actuator.

AttributeValue
Supply Voltage24 V dc
Safety Contacts2NC
Housing MaterialPlastic
Auxiliary ContactsNO
Connection Type2m cable
Switch TypeRectangular
Terminal TypePre-Wired
SeriesSPF-RFID-M
Switching Distance10 (Close) mm, 20 (Open) mm
IP RatingIP67
Supply Current200 mA
Actuator IncludedYes
Actuator TypeMaster Coded
Length50 (Actuator) mm, 50 (Switch) mm
Number of Approach Directions2
Depth13 (Actuator) mm, 13 (Switch) mm
Dimensions50 x 25.5 x 13 (Actuator) mm, 50 x 25.5 x 13 (Switch) mm
Housing ColourRed
Sensor PrincipleMagnetic, RFID
Safety Category4
Width25.5 (Actuator) mm, 25.5 (Switch) mm