Telemecanique Sensors Safety Switch, IP67

Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): FR
Produktdetaljer

XCS-DMC/XCS-DMP Coded Magnetic Switches, Rectangular

XCS-DM coded magnetic safety switches are designed for monitoring the doors, covers and guards of industrial machines with imprecise guiding and low inertia. These safety switches are ideally suited for machines subjected to frequent washing or liquid spray. They protect the operator by immediately stopping any dangerous movement as soon as the distance between the switch and its magnet is greater than 8mm (5mm for XCS-DMC).
XPS-DM safety modules are specifically designed for monitoring the coded magnetic safety switches. When the XCS-DM safety switch is used in conjunction with the XPS-DM safety relay they offer a certified safety solution for guard monitoring.

Coded magnetic safety switch

Actuation on 3 sides: face to face and face to side
8mm tolerance to misalignment (5mm for XCS-DMC)
LED versions have an LED in series with one N/C giving indication when guard is closed
Coded reed technology - switch cannot be totally defeated by a simple magnet
Rectangular plastic housing
Dimensions: compact: H51 x W16 x D7mm, standard: H88 x W25 x D13mm
Available pre-cabled or with connector on flying lead
IP66/67 protection in accordance with EN/IEC 60529
ROHS compliant

Safety module

Allows multi-switch monitoring to Safety Category 4 solutions in accordance with EN954-1/ISO 13849-1
XPS-DMB can monitor 2 independent sensors and modules, XPS-DME can monitor 6 independent sensors and modules
2 safety outputs and 2 solid state outputs for signalling to the process PLC
LEDs on the front face provide information on the monitoring circuit status
Dimensions: H99 x W22 x D114mm
IP20 protection on terminals and IP40 protection on enclosure, in accordance with EN/IEC 60529

Note

With the appropriate monitoring system and correctly wired these switches can reach safety category 4 conforming to EN/ISO 13849-1, PL e conforming to EN/ISO 13849-1, SIL 3 conforming to EN/IEC 61508.

Standards

IEC 947-1; EN 547-5-1; EN 547-5-3; EN 60204-1; EN 1088 (for Magnetic Switch only)
IEC 204-1; EN 292; EN 60204-1; EN954-1; EN1088 (for Safety Module only)

Specifikationer
Attribute Value
Switch Type Magnetic Proximity
Length 51mm
Width 16mm
Depth 7mm
Dimensions 51 x 16 x 7 mm
25 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
707,26 kr
(exkl. moms)
884,08 kr
(inkl. moms)
Enheter
Per unit
1 +
707,26 kr
Related Products
The Siemens 3SE6 series safety switch has 15mm ...
Description:
The Siemens 3SE6 series safety switch has 15mm safe operating distance when OFF and 5mm safe operating distance when ON. It has 1NO and 1NC contact. This magnet switch is designed for mounting on movable protective guards such as covers, ...
Smallest designActuation only possible with BPS260, available separatelyLeft-hand ...
Description:
Smallest designActuation only possible with BPS260, available separatelyLeft-hand or right-hand side versions for door-mountingControl category up to 4 to EN954-1IP67 protection Connector 8 mm, 6-pole, latching interlockingDimensions: L13 x W26 x H36 mm.
The Schmersal BNS260 series non-contact safety switch has ...
Description:
The Schmersal BNS260 series non-contact safety switch has a safe switch ON distance of 5mm and switch OFF distance of 15mm. This switch has 2NC contact. It has a black thermoplastic enclosure and can be concealed mounted as well.Note: Actuating ...
The Pilz PSENmag series non-contact safety switch has ...
Description:
The Pilz PSENmag series non-contact safety switch has an assured switching distance of 8mm with round M30 design. It has 2NO safety contacts. It meets the highest safety requirements and offers a complete solution that is safe and economical. Supplied ...