STR1 RFID Safety Switch, Vistal, 24 V dc

  • RS-artikelnummer 146-6209
  • Tillv. art.nr STR1-SAFM0AC5
  • Tillverkare / varumärke Sick
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): MY
Produktdetaljer

the Str1 transponder safety switch has monitored semiconductor outputs (oSSds) and can be safely connected either individually or in series. It can be used for applications where a high level of manipulation protection is required. the Str1 is available with three codes. universally coded sensors accept all actuators. an actuator must be taught into both the uniquely coded and permanently coded variants, this is the only actuator that the Str1 then accepts. the sensor has three active sensor surfaces. the actuator comes in three different sizes. this allows the Str1 to offer maximum mounting flexibility.

response range of up to 14 mm
Small housing with flexible mounting
options
Sensor activation possible from three
sides
three different actuators available

Specifikationer
Attribute Value
Supply Voltage 24 V dc
Housing Material Vistal
Auxiliary Contacts 1
Connection Type 5­Pin M12 Plug
Switch Type Safety
Terminal Type 0.2m cable with 5-Pole M12 Connector
Series STR1
Switching Distance 9 (Side Sensor - On) mm, 14 (Front Sensor - On) mm, 28 (Off) mm
IP Rating IP67
Supply Current 50 mA
Actuator Included Yes
Dimensions 18 x 26.2 x 40 mm
Standards Met CE, CULus, EN 62061, FCC, IEC 61508
Sensor Principle RFID
Safety Category Category 4 (EN ISO 13849), PL e (EN ISO 13849), SIL3 (IEC 61508), SILCL3 (EN 62061)
Depth 40mm
Length 18mm
Width 26.2mm
Number of Approach Directions 5
Actuator Type Flat
Built in Safety Relay Yes
3 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
1 019,88 kr
(exkl. moms)
1 274,85 kr
(inkl. moms)
Enheter
Per unit
1 +
1 019,88 kr
Related Products
The SensaGuard Non-Contact Switch is PLe, SIL 3 ...
Description:
The SensaGuard Non-Contact Switch is PLe, SIL 3 and Cat 4 rated and is intended for use with sliding, hinge or lift-off machine guard doors. These safety switches are based on RFID (Radio Frequency IDentification) technology for coding and inductive ...
The Bernstein AG diagnostic module is a device ...
Description:
The Bernstein AG diagnostic module is a device for diagnosing SRF safety switches of DIN rail housing 22.5 mm. With its innovative diagnostic system, the RFID device makes safety circuits suitable for Industry 4.0. The system provides a multitude of ...
Proximity safety circuit, multicode sensor with RFID coding, ...
Description:
Proximity safety circuit, multicode sensor with RFID coding, model 4, automatic or manual start, integrated diagnostics, 24 V DC supply, M12 connector. The PSR-CT safety circuit consists of a combination of a PSR-CT-...-SEN-1-8 sensor with varying coding types and a ...
The Allen Bradley GuardMaster 440N series magnetic safety ...
Description:
The Allen Bradley GuardMaster 440N series magnetic safety switch has a supply voltage rating of 24VAC/VDC. This switch comes with a housing width of 22.5mm and a control unit 1. It incorporates several magnetically sensitive elements, which must be triggered ...