STR1 RFID Safety Switch, Vistal, 24 V dc

  • RS-artikelnummer 146-6203
  • Tillv. art.nr STR1-SASM0AC5
  • Tillverkare / varumärke Sick
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): MY
Produktdetaljer

the Str1 transponder safety switch has monitored semiconductor outputs (oSSds) and can be safely connected either individually or in series. It can be used for applications where a high level of manipulation protection is required. the Str1 is available with three codes. universally coded sensors accept all actuators. an actuator must be taught into both the uniquely coded and permanently coded variants, this is the only actuator that the Str1 then accepts. the sensor has three active sensor surfaces. the actuator comes in three different sizes. this allows the Str1 to offer maximum mounting flexibility.

response range of up to 14 mm
Small housing with flexible mounting
options
Sensor activation possible from three
sides
three different actuators available

Specifikationer
Attribute Value
Supply Voltage 24 V dc
Housing Material Vistal
Auxiliary Contacts 1
Connection Type 5­Pin M12 Plug
Switch Type Safety
Terminal Type 0.2m cable with 5-Pole M12 Connector
Series STR1
Switching Distance 6 (Side Sensor - On) mm, 10 (Front Sensor - On) mm, 25 (Off) mm
IP Rating IP67
Supply Current 50 mA
Actuator Included Yes
Depth 40mm
Width 26.2mm
Safety Category Category 4 (EN ISO 13849), PL e (EN ISO 13849), SIL3 (IEC 61508), SILCL3 (EN 62061)
Standards Met CE, CULus, EN 62061, FCC, IEC 61508
Dimensions 18 x 26.2 x 40 mm
Sensor Principle RFID
Built in Safety Relay Yes
Actuator Type Standard
Number of Approach Directions 5
Length 18mm
10 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
937,88 kr
(exkl. moms)
1 172,35 kr
(inkl. moms)
Enheter
Per unit
1 +
937,88 kr
Related Products
The Allen Bradley Guardmaster 440N series RFID safety ...
Description:
The Allen Bradley Guardmaster 440N series RFID safety switch has a supply voltage rating of 24VDC and the maximum sensing distance of 10mm. This switch comes with 18 mm stainless steel barrel, 18mm standard actuator, 10m cable. It features the ...
The Allen Bradley Guardmaster SensaGuard non-contact switch uses ...
Description:
The Allen Bradley Guardmaster SensaGuard non-contact switch uses the latest generation of RFID technology for coding and inductive technology for sensing. SensaGuard’s large sensing range and tolerance to misalignment is a cost-effective solution that is ideally suited for a wide ...
The SensaGuard Non-Contact Switch is PLe, SIL 3 ...
Description:
The SensaGuard Non-Contact Switch is PLe, SIL 3 and Cat 4 rated and is intended for use with sliding, hinge or lift-off machine guard doors. These safety switches are based on RFID (Radio Frequency IDentification) technology for coding and inductive ...
With no need for a separate safety relay ...
Description:
With no need for a separate safety relay this device saves space in the cabinet with no loss of functionality and is easy to install. provides Cat 3//4 or SIL 2//3 protection on moveable machine guards or where frequent washdown ...