Sensaguard 440N RFID Safety Switch, Plastic, 24 V dc

Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): DO
Produktdetaljer

SensaGuard 440N Rectangular Non-Contact Switch

The SensaGuard Non-Contact Switch is PLe, SIL 3 and Cat 4 rated and is intended for use with sliding, hinge or lift-off machine guard doors. These safety switches are based on RFID (Radio Frequency IDentification) technology for coding and inductive technology for sensing. Combined with a large sensing range for optimum operation and tolerance to misalignment, these non-contact switches are a cost-effective solution to a wide range of industrial safety applications.

No dedicated controller required for its RFID coding security
Switches can be connected in series with other devices (e.g. Light Curtains, E-stops, interlock switches)
PLe, SIL 3, Cat 4 rating maintained with multiple units connected in series
Can be connected to standard safety relays, SmartGuards and safety I/O blocks
They provide three different types of PNP output including one auxiliary PNP
Equipped with an LED to indicate the device status and any faults
IP69K environmental rating

Standards

EN 60947-5-3, IEC 61508, EN 954

Specifikationer
Attribute Value
Supply Voltage 24 V dc
Housing Material Plastic
Range Sensaguard
Terminal Type Cable
Series 440N
IP Rating IP69K
Actuator Included Yes
Depth 20.65mm
Dimensions 88.14 x 24.99 x 20.65 mm
Sensor Principle RFID
Housing Colour Red
Safety Category 4
Actuator Type Coded
Width 24.99mm
Length 88.14mm
12 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
1 032,00 kr
(exkl. moms)
1 290,00 kr
(inkl. moms)
Enheter
Per unit
1 +
1 032,00 kr
Related Products
The Ferrogard FRS 6, 9 and 10 are ...
Description:
The Ferrogard FRS 6, 9 and 10 are magnetically actuated non-contact safety switches which offer reliability and a high tolerance to misalignment. Designed to be installed on a guard door, the action of the magnetic actuator being removed from the ...
Smallest designActuation only possible with BPS260, available separatelyLeft-hand ...
Description:
Smallest designActuation only possible with BPS260, available separatelyLeft-hand or right-hand side versions for door-mountingControl category up to 4 to EN954-1IP67 protection Connector 8 mm, 6-pole, latching interlockingDimensions: L13 x W26 x H36 mm.
Just one safety switch is sufficient for applications ...
Description:
Just one safety switch is sufficient for applications up to Cat 4 of EN954-1 - saving on wiringPossible to provide protection against defeat in accordance with VDE 060 by concealing the installationSimplified installation and adjustment.
Control category 1 to EN954-1Output function indicated at ...
Description:
Control category 1 to EN954-1Output function indicated at rear of switch by LEDIdeal for lower risk applications, integral evaluation means no additional safety module is requiredIP67 protection Suitable for food processing industry.